Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Medford, MA
Gate motor and opener work in Medford means dealing with posts that shift with every New England winter. The shallow urban fill under most pre-war lots heaves and contracts, throwing gate geometry off enough that motors bind, gears strip, and limit switches drift out of position season after season. We fix the whole system, not just the part that failed, and we hand you a written price before any tool comes off the truck. Call (928) 260-0864 and a live person answers.
Why Medford Homes Are Different
Medford’s density is the throughline for nearly every gate repair we do here. The city’s triple-deckers, two-family colonials, and Victorian singles sit on tight lots, many with driveways pinched between houses that were built before the Model T changed driveway width. Gate posts are often sunk in whatever fill was available when the house went up, not in engineered footings. After enough freeze-thaw cycles, posts lean, gates drag, and hardware that was square in September is binding by February.
The salt doesn’t help. Heavy municipal road-salt use through winter pushes brine into hinges and latch hardware on nearly every Medford gate, accelerating corrosion on iron and steel components. Parcels near the Mystic River hold groundwater well into spring, which means post rot in wooden gates and rust creep on iron gates in West Medford, South Medford, and the river-facing blocks. When we replace a hinge or a post here, we account for that moisture, not just the load of the gate.
West Medford’s early-1900s wrought-iron gates on brick or stone pillars carry their own quirk: the pillar itself often tilts before the gate does. That means masonry anchor work, not just new hardware. None of this is exotic to us. It’s the standard Medford call.
Our Main Medford Services
Medford homeowners call us most for two things: repairing an existing gate that’s failing, and installing a gate where none existed or replacing one that’s beyond repair.
Gate Repair in Medford
When a Medford gate won’t open, won’t close, or hangs out of plumb, the repair almost always traces back to local conditions: post heave, corroded hardware, or a motor fighting geometry that shifted over winter. We reset, replace, and realign, and we photograph every adjustment before we leave. The Haven Standard applies on every visit, written price first, proof after. Learn more about Gate Repair in Medford.
Gate Installation in Medford
New gate installation in Medford means digging below the freeze line and setting posts in concrete sized for the soil, not for a generic spec. Whether it’s a driveway gate on a shared side lot or a pedestrian gate on a West Medford walkway, the footing is the whole job. We quote the work in writing before it starts, including any demolition of old posts or masonry. Learn more about Gate Installation in Medford.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Medford
A gate motor in Medford has to survive freeze-thaw cycles, road-salt air, and tight lots where the post might shift a quarter inch every year. When we open a motor housing and find a stripped gear, it’s rarely the gear’s fault. The gate was binding because the post moved, and the motor became the load-bearing component. We fix the alignment and the motor together. Our Gate Motor & Opener work covers nine automation brands, including Viking, Ghost Controls, and DoorKing, so you’re not forced into a replacement just because the existing motor isn’t a brand a competitor stocks.
Motor Installation
Signs you need it
The motor is dead, the arm bracket is bent, or the existing unit is underpowered for the gate as it now swings.
What it costs in Medford
A new swing gate motor with installation on an existing gate in Medford typically runs $1,250-$2,600 depending on brand and whether the arm bracket is still serviceable.
How we do it
We verify the posts are square and the gate travels freely, set the new motor to the correct limits, and photograph the final switch positions and torque readings before we leave.
Motor Repair
Signs you need it
The gate hums but doesn’t move, trips a breaker, or opens partially and reverses.
What it costs in Medford
Motor repair in Medford typically runs $195-$740 depending on whether we’re replacing a capacitor, a limit switch, or the gear assembly.
How we do it
We open the housing, identify the failed component, replace it with an OEM or equivalent part, and run the gate through ten full cycles to confirm the fix holds.
Intercom Integration
Signs you need it
You have a gate motor but no way for a visitor to call from the gate to the house, or the existing intercom posts static instead of voice.
What it costs in Medford
Adding a gate intercom to an existing opener in Medford typically runs $480-$1,900 depending on whether you’re running new wire or going wireless.
How we do it
We mount the call station at the gate, wire it to the operator control board, and program the relay outputs so the gate opens on command from the handset or app.
What Gate Motor & Opener Costs in Medford
| Item | Typical range in Medford |
|---|---|
| Motor installation (swing) | $1,250-$2,600 |
| Motor repair | $195-$740 |
| Intercom integration | $480-$1,900 |
Can you fix a gate motor the same day in Medford?
Most motor repairs are completed same-day when the part is on the truck. Capacitors, limit switches, and gears are common enough that our Medford runs carry them as standard stock. Call (928) 260-0864 and we’ll tell you what’s needed and when we can be there.
What brand of motor is best for a Medford gate?
The best motor is the one matched to your gate’s weight and swing arc, not a brand name. We service Viking, Ghost Controls, DoorKing, Elite, and five other majors, install whatever fits the job, and never push replacement if repair makes sense. Written price before work starts, every time.
Gate Access Control in Medford
Access control on a Medford gate is about more than convenience. Many of these gates sit between two-family lots or across shared driveways, where a code or a remote is the only thing preventing a stranger from wandering onto the property. In older Medford housing stock, these systems are often retrofits bolted onto gates and posts that have shifted enough to misalign card readers and keypads. Our Gate Access Control work includes keypads, card readers, and phone entry, all wired and programmed to survive a New England winter.
Keypad Entry
Signs you need it
The keypad is cracked, unresponsive, or asks for a code you never set, or the gate opens for any random four-digit entry.
What it costs in Medford
Keypad installation on an existing gate in Medford typically runs $280-$850 depending on wiring condition and whether we need to pull new cable to the operator.
How we do it
We mount the keypad where it can be reached from a vehicle, wire it to the controller, program the codes, and seal the enclosure against road salt and rain.
Phone Entry
Signs you need it
You want visitors to call your phone from the gate, not carry a remote, or your existing call box drops calls or buzzes.
What it costs in Medford
Phone entry systems for Medford gates typically run $480-$1,900 depending on whether we can use the existing low-voltage wire or need to run new.
How we do it
We install the call station at the gate, connect it to the operator’s relay, and program the directory so a call rings your phone and the gate opens on your command.
What Gate Access Control Costs in Medford
| Item | Typical range in Medford |
|---|---|
| Keypad entry | $280-$850 |
| Phone entry | $480-$1,900 |
| Card reader | $380-$980 |
Do you run the low-voltage wire for access control in Medford?
Yes, we run and terminate the low-voltage wiring. Older Medford lots often have buried conduit from a previous system, but when we can’t find usable wire, we pull new. The price is in writing before the trench opens.
Can I add a keypad to an existing motor, or do I need a new operator?
You can add a keypad to most existing operators. We tie it into the open-command terminals on the control board and program the codes. If the board lacks an input, we wire in a receiver. Call (928) 260-0864 and we’ll tell you what your gate will take.
Gate Parts & Welding in Medford
Older Medford gates wear out at the joints first: hinges that carried a hundred years of snow load, latch posts that have been hit by delivery trucks, steel rails that rusted through at the bottom where they sat in salted slush. Parts and welding work is the difference between a gate that’s patched and a gate that’s fixed. Our Gate Parts & Welding service covers hinge replacement, post replacement, rail repair, and custom welding on iron and steel, done to match the existing metal, not to look patched.
Hinge Replacement
Signs you need it
The gate sags on the latch side, scrapes the ground, or the hinge pins are so worn you can lift the gate half an inch by hand.
What it costs in Medford
Hinge replacement on a Medford residential gate typically runs $180-$520 for a pair, more if we’re cutting welded hinges off iron posts.
How we do it
We support the gate on jacks, cut or unbolt the old hinges, weld or bolt the new ones in place, and set the gate so it swings without binding.
Post Replacement
Signs you need it
The post leans more than a few degrees, is rusted through at the base, or the gate no longer latches because the post has moved.
What it costs in Medford
Post replacement in Medford typically runs $450-$1,200 per post including concrete, deeper in areas where the fill is unstable.
How we do it
We dig below the freeze line, set the new post in concrete, brace it square, and let it cure before re-hanging the gate so it stays plumb through the next winter.
Custom Welding
Signs you need it
You have broken pickets, a rusted-through rail, or a gate that was cut for a different opening and needs a section properly welded in.
What it costs in Medford
Custom welding on Medford gates typically runs $220-$950 depending on the extent of the repair and whether we’re working on iron or steel.
How we do it
We grind the area clean, weld in matching material, grind the weld smooth where it shows, and prime the repair so it doesn’t flash-rust in Medford’s wet springs.
What Gate Parts & Welding Costs in Medford
| Item | Typical range in Medford |
|---|---|
| Hinge replacement | $180-$520 |
| Post replacement | $450-$1,200 |
| Custom welding | $220-$950 |
Can you weld a gate without removing it from the hinges?
Often, yes. We weld pickets, rails, and cracked seams in place with fire-safe shielding and a clean work area around the surrounding material. For structural repairs near the hinge line, we remove the gate, weld it on the truck bed, and re-hang it the same visit.
Do you replace wooden gate posts in Medford?
Yes, we replace wooden posts and the hardware that fastens to them. Medford gate posts near the Mystic River rot faster than in hill sections, so we use pressure-treated stock and set the concrete above grade. Call (928) 260-0864 for a written price before any excavation starts.
Brands We Service in Medford
We service Viking, Ghost Controls, DoorKing, and Elite among nine major automation brands. The common repair parts for these units travel with us on every Medford run. That means most motor and opener repairs are completed the first visit, not the second. See our brands for the full list.
Pricing for Gate Repair in Medford, MA
| Service | Typical range in Medford |
|---|---|
| Motor installation (swing) | $1,250-$2,600 |
| Motor repair | $195-$740 |
| Intercom integration | $480-$1,900 |
| Keypad entry | $280-$850 |
| Phone entry | $480-$1,900 |
| Card reader | $380-$980 |
| Hinge replacement | $180-$520 |
| Post replacement | $450-$1,200 |
| Custom welding | $220-$950 |
Prices in Medford run higher when frost heave has moved a post enough that the gate binds, when the existing masonry pier is cracked and needs anchoring, or when road salt has corroded wiring and hardware past the point of salvage. Every price is written, quoted, and agreed before any work starts. That’s Clause 1 of the Haven Standard, and we don’t waive it.
Neighborhoods We Serve in Medford
We run service calls throughout Medford, including these neighborhoods:
- West Medford
- South Medford
- North Medford
- Medford Hillside
- Lawrence Estates
Typical response is same-day or next-morning for motor failures and emergency gate-down calls. A live person answers 24/7, so you’ll know exactly when a technician can arrive before you hang up.
Service Area - Cities Near Medford
Our Medford crews also handle gate repair calls in Malden, MA, Somerville, MA, Arlington, MA, and Everett, MA. Same written-pricing policy applies in every city we serve.
Serving Medford, MA - Our Local Coverage Area
We’re based in the Medford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Medford
Most Medford calls are dispatched same-day, and emergency gate-down calls are prioritized. Dispatch is coordinated from the brand’s Boston office, with crews serving Medford directly. A live person answers 24/7, so you get a real arrival window, not a voicemail queue. Call (928) 260-0864.
Most gate repairs and motor replacements use existing posts and don’t require a permit. New post installation or new driveway gate work may, depending on your specific lot and any local HOA or historic district overlays. We’ll tell you what your job needs, in writing, before work starts.
Yes, and it’s a common Medford call given how many driveways are shared between two- and three-family houses. We document the existing condition, quote the repair in writing, and provide a photo record afterward so both parties can see exactly what was done and what it cost.
If your Medford gate isn’t opening, closing, or sitting square, call (928) 260-0864. A live person answers, the estimate is free, and the price is in writing before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Medford Customers Say
"Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A.