Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Pico Rivera, CA
Gate motor and opener failures account for the majority of our repair calls in Pico Rivera, and the root cause here is almost never the motor itself. It’s the post. Nearly every swing and slide gate in this city is anchored into a CMU pillar set into expansive river-deposited soil, and seasons of clay expansion and contraction eventually lean those pillars out of plumb. When the post moves, the motor works against the rack or arm, burning circuit boards and stripping gears on hardware that would have lasted another ten years on stable ground. Call us at (928) 260-0864 when your gate starts grinding, hesitating, or refusing to open, and we’ll start by checking the structure before we ever blame the electronics.
Why Pico Rivera Homes Are Different
Pico Rivera sits entirely on the alluvial floodplain between the San Gabriel River to the east and the Rio Hondo to the west. Every gate post in the city is anchored in the same river-deposited, expansive clay-and-silt soils that shift seasonally. This causes chronic post lean and misalignment across the city’s dense grid of single-family driveway and yard gates. Structural post correction is a routine part of virtually every gate repair call here in a way it simply wouldn’t be in the hillside or bedrock-underlain cities nearby.
The housing stock compounds the issue. The city is dominated by 1950s through 1970s tract homes whose perimeters are almost universally enclosed by concrete masonry unit block walls, the standard working-class LA County boundary fence. Steel swing and sliding gates are hung directly from these aging CMU pillars. As the alluvial soils beneath them move, the pillars crack and lean, transferring stress to hinges, rollers, and latches.
The low-lying bowl position between the two river channels traps marine-layer moisture and limits airflow, creating persistently higher localized humidity than surrounding elevated communities like Whittier or Montebello. That humidity accelerates surface rust on uncoated steel gate frames and corrodes roller bearings faster than owners expect. Santa Ana wind events then hammer already-weakened hinges on gates whose posts have shifted out of plumb. It’s a compounding problem: soil moves the post, moisture rusts the hardware, wind finishes what the first two started.
Our Main Pico Rivera Services
Most homeowners in Pico Rivera call us for one of two reasons: a gate that has stopped working and needs repair, or an old gate that needs to be replaced with something built for the soil conditions here. Both start with the same first step: a written inspection, a written price, and a photograph of what we found.
Gate Repair in Pico Rivera
Most repair calls in Pico Rivera involve a gate that has sagged, seized, or stopped traveling smoothly. We find the poster child version on nearly every street: the CMU pillar has leaned an inch or more out of plumb, the hinge pins are bent, and the motor is fighting the geometry. The repair job is about correcting the post lean first, then addressing the hardware that failed because of it. We re-shim and reinforce pillars, re-hang the gate leaf, replace worn rollers and hinges, and reset the motor limits to match the corrected travel. Every repair includes a documented photo record of what was found and what was set. Learn more on our dedicated Gate Repair in Pico Rivera page.
Gate Installation in Pico Rivera
New installations in Pico Rivera succeed or fail based on what happens below grade, not what gets bolted above it. We over-excavate post holes and set gate posts in deep concrete footings that resist the seasonal expansion and contraction of the river-plain soil. Frame selection matters too: powder-coated steel or aluminum both hold up better than raw steel in this bowl-trapped humidity. Every installation includes a written scope, a written price, and a photo log of the work. Visit our Gate Installation in Pico Rivera page for the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Pico Rivera
Gate motor and opener work in Pico Rivera almost always begins with a structural check, because the alluvial soil under this city moves gate posts out of alignment and forces every motor to work harder than it should. When a post leans, the motor’s gearbox absorbs the strain until something gives. When that happens, you get a dead opener, a stripped gear, or a gate that travels halfway and reverses. Our Gate Motor & Opener work starts with post alignment, then moves to the motor itself.
Motor Installation
Signs you need it
The gate motor hums but nothing moves, trips its breaker repeatedly, or is older and has already been repaired twice.
What it costs in Pico Rivera
Motor installation in Pico Rivera typically runs between $750 and $1,800 depending on the motor type and whether the post needs correction first.
How we do it
We verify post alignment, install the new motor and brackets, set travel limits, wire it to code, and photograph the finished installation.
Slide Motor
Signs you need it
The slide gate stutters mid-travel, grinds against its rack, or the motor runs but the gate does not move.
What it costs in Pico Rivera
Slide motor replacement in Pico Rivera runs $850 to $1,700, with the final figure depending on the rack condition and motor brand.
How we do it
We inspect the rack and rollers, install the new slide motor, align the drive sprocket, then set and photograph the limit positions.
Motor Repair
Signs you need it
The gate reverses before closing, responds intermittently to the remote, or the motor casing is hot to the touch after a cycle.
What it costs in Pico Rivera
Motor repair in Pico Rivera typically costs between $250 and $650, covering limit switches, capacitor replacements, and control board repairs.
How we do it
We open the motor housing, test the board and switches, replace the failed component, reset the limits, and leave you a written record of the repair.
What Gate Motor & Opener Costs in Pico Rivera
| Item | Typical range in Pico Rivera |
|---|---|
| Motor installation | $750 - $1,800 |
| Slide motor replacement | $850 - $1,700 |
| Motor repair | $250 - $650 |
How fast can you get a motor repaired in Pico Rivera?
We keep common motors and boards in stock and can usually get a tech to your Pico Rivera home the same day for emergency calls. The written quote is delivered before any work starts.
Do you service older gate motors still in use around Pico Rivera?
Yes. Many Pico Rivera homes run motors that are 15 to 20 years old, and we repair what is repairable before recommending replacement. Call (928) 260-0864 for a written assessment.
Gate Access Control in Pico Rivera
Access control on Pico Rivera gates needs to survive the same soil movement as the mechanical hardware, but the failure pattern is different: moisture intrusion, jostled wiring, and keypads that stop reading in the marine-layer humidity. Our Gate Access Control work addresses both the electronics and the physical mounting that keeps them alive in this environment.
Keypad Entry
Signs you need it
The keypad fails to register entries, flashes error codes, or the buttons have gone unresponsive in humid weather.
What it costs in Pico Rivera
Keypad entry installation or replacement in Pico Rivera typically runs $425 to $950 including wiring and programming.
How we do it
We mount the keypad in a weather-sealed enclosure, run the wiring through conduit, program the codes, and photograph the final setup.
Video Intercom
Signs you need it
The gate camera is blurry, the intercom fails to ring the house, or the video feed drops when the gate cycles.
What it costs in Pico Rivera
Video intercom systems in Pico Rivera start around $900 for a basic setup and run up to $2,400 for multi-station systems.
How we do it
We install the camera and call station at the gate, run the cable or configure the wireless link, wire the indoor monitor, and test the whole loop before we leave.
What Gate Access Control Costs in Pico Rivera
| Item | Typical range in Pico Rivera |
|---|---|
| Keypad entry | $425 - $950 |
| Video intercom | $900 - $2,400 |
| Remote control programming | $95 - $250 |
Will a video intercom survive the humidity in Pico Rivera?
Yes, if the enclosure is sealed properly and the wiring is run through conduit. We use weather-rated housings and seal every penetration, because the river-plain moisture here is a real factor.
Can you integrate an access system with an existing gate motor?
Most of the time, yes. We work with the nine brands we service, and the access system can usually be integrated without replacing the motor. Call (928) 260-0864 for a written quote.
Gate Parts & Welding in Pico Rivera
Gate parts and welding in Pico Rivera come down to one recurring job: hinge and post work on gates hung from CMU pillars that have shifted. The soil under this city expands and contracts, the pier leans, and the hinge plates tear away from the masonry. Our Gate Parts & Welding service fixes the structural failures so the moving parts stop eating themselves.
Hinge Replacement
Signs you need it
The gate sags at the latch side, scrapes the ground, or the hinge pins show visible wear or breakage.
What it costs in Pico Rivera
Hinge replacement in Pico Rivera runs $180 to $450 per hinge pair, including re-alignment of the gate leaf.
How we do it
We remove the old hinges, weld or bolt new plates into position, re-hang the leaf to swing level, and photograph the adjusted clearances.
Post Replacement
Signs you need it
The CMU pillar has leaned more than an inch out of plumb, cracked at the grout lines, or the hinge bolts have pulled loose.
What it costs in Pico Rivera
Post replacement in Pico Rivera typically costs $700 to $1,800 depending on footing depth and whether the adjoining block wall also needs re-stacking.
How we do it
We cut out the failed pillar, over-excavate the footing, pour a deeper concrete base, set the new post, and re-hang the gate with a photograph of the plumb reading.
Gate Rollers
Signs you need it
The slide gate drags, squeals, or the roller wheels are visibly flattened or rusted from the marine-layer moisture.
What it costs in Pico Rivera
Gate roller replacement in Pico Rivera runs $150 to $500 depending on the number of rollers and whether the track also needs realignment.
How we do it
We swap the worn rollers, adjust the track alignment, test the gate travel, and leave you a photo log of the new roller positions.
What Gate Parts & Welding Costs in Pico Rivera
| Item | Typical range in Pico Rivera |
|---|---|
| Hinge replacement | $180 - $450 |
| Post replacement | $700 - $1,800 |
| Gate rollers | $150 - $500 |
Is welding necessary for a leaning gate post in Pico Rivera?
Often yes. A post that has leaned due to soil movement usually needs the gate leaf cut free, the post reset or replaced, and new hinge plates welded into position. Call (928) 260-0864 for an exact quote.
Can you fabricate a custom gate part if an original is no longer made?
Yes. Many 1960s and 1970s Pico Rivera gates use hardware that is no longer manufactured. We can weld custom brackets, hinge barrels, and latch strikes to match.
Brands We Service in Pico Rivera
We maintain parts stock for Ghost Controls, DoorKing, and Mighty Mule systems, plus we can source Elite and several others on short notice. Most board-level parts are available within 24 to 48 hours, and we carry replacement remote controls and photo-eyes on the truck. See our brands page for the full list of supported systems.
Pricing for Gate Repair in Pico Rivera, CA
| Service | Typical range in Pico Rivera |
|---|---|
| Hinge replacement | $180 - $450 |
| Gate rollers | $150 - $500 |
| Motor repair | $250 - $650 |
| Keypad entry | $425 - $950 |
| Post replacement | $700 - $1,800 |
| Motor installation | $750 - $1,800 |
| Slide motor replacement | $850 - $1,700 |
| Video intercom | $900 - $2,400 |
What pushes the price up in Pico Rivera is almost always the post. If the CMU pillar your gate hangs from has leaned out of plumb, that correction is part of the job, not a surprise line item added later. Every price is written down, handed to you, and agreed before any work starts, under Haven Standard Clause 1 (Have it in writing).
Neighborhoods We Serve in Pico Rivera
We work throughout Pico Rivera, including the neighborhoods between Whittier Boulevard and Slauson Avenue, the residential streets north of Mines Avenue, and the blocks around Rivera Park and Smith Park. Typical response for a Pico Rivera call is same-day for emergencies and within 24 hours for scheduled work.
- Central Pico Rivera
- North Pico Rivera
- Rivera District
- South Pico Rivera
- West Pico Rivera
Service Area - Cities Near Pico Rivera
We also handle gate work in the cities bordering Pico Rivera: Montebello, CA to the north, Whittier, CA to the south and east, Bell Gardens, CA to the west, and Downey, CA to the southwest. Dispatch for all of these areas is coordinated from the brand’s Los Angeles office, with crews deployed locally.
Serving Pico Rivera, CA - Our Local Coverage Area
We’re based in the Pico Rivera area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pico Rivera
Same-day emergency dispatch is common for gate failures in Pico Rivera, and scheduled calls land within one to two business days. A live person answers the phone 24/7, so you can call at (928) 260-0864 any hour to get a tech routed your way.
Most gate repairs and like-for-like replacements do not require a city permit in Pico Rivera, but new motor installations and structural post work may fall under county electrical or building code. We handle permit coordination when required and will tell you at the written estimate stage.
Yes. Gates along the San Gabriel River and Rio Hondo edges of the city sit on the same expansive soils as the rest of Pico Rivera, and we handle the post correction and rust mitigation those areas call for. The written price still applies before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pico Rivera Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.