Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Flower Mound, TX
Gate motor and opener problems in Flower Mound usually trace back to two things: the Blackland Prairie clay shifting posts out of alignment, and operators that were installed 15 to 25 years ago when much of the town was built. Most calls we run here involve a motor that trips its breaker, grinds, or refuses to move a gate that has slowly gone out of plumb. Call (928) 260-0864 and we’ll send a technician who writes the price down before any work begins.
Why Flower Mound Homes Are Different
Flower Mound’s master-planned building boom in the 1990s and 2000s produced neighborhoods like Bridlewood, Wellington, and Canyon Falls where HOA deed restrictions mandated ornamental iron or tubular steel driveway gates. Those gates are now 15 to 25 years old, and they are failing on a similar timeline. Compounding the age issue is the soil. The expansive clay under most of Flower Mound swells after spring rain and shrinks during dry summers, which moves posts a fraction of an inch at a time until a hinge binds or an operator overloads. The February 2021 ice storm added another layer of damage, cracking electromechanical operators that were never built for extended sub-freezing temperatures. We work on this specific combination of aging HOA gates and shifting clay every week.
Our Main Flower Mound Services
Flower Mound homeowners call us most often for two things: repairing an existing gate that has stopped working properly, and replacing a gate outright when the HOA requires a specific style or the old one is beyond repair.
Gate Repair in Flower Mound
Repair work in Flower Mound usually starts with a post that has drifted out of plumb or a hinge that has seized from years of clay-driven movement. We realign, replace worn parts, and get the gate swinging or sliding again without replacing what still works. Our repair page covers what we fix and how we price it. Gate Repair in Flower Mound
Gate Installation in Flower Mound
When a gate has rusted through or an HOA requires a specific ornamental iron design, installation is the better path. Flower Mound’s deed restrictions often mean the new gate has to match the neighborhood’s original look, which we document before ordering anything. Gate Installation in Flower Mound
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Flower Mound
Gate motor and opener failures in Flower Mound cluster in two places: the brick subdivisions off FM 2499 and Morriss Road where swing gates strain against posts that shift with the clay, and the Bridlewood side where slide gates carry extra dirt and grit from the equestrian trails. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule motors without steering you toward a brand swap just because it is easier for us. This is our Gate Motor & Opener specialty.
Motor Installation
Signs you need it
Your old operator trips the breaker repeatedly, the motor housing is cracked, or the gear train sounds like a box of rocks even after the gate is freed from the post.
What it costs in Flower Mound
A swing-gate operator replacement typically runs $1,480-$2,950, and a slide-gate operator typically runs $1,750-$3,400, depending on brand and whether the mounting plate can be reused.
How we do it
We pull the old operator, photograph the wiring before touching a terminal, install the new motor on a reinforced pad or bracket, set the limit switches, and hand you a written record of every setting.
Motor Repair
Signs you need it
The gate opens halfway and stops, the motor hums but does not move, or a limit switch lets the gate slam past its normal stop point.
What it costs in Flower Mound
Motor repair diagnostics and work run $145-$470 for board-level and limit-switch repairs, with board replacement $350-$800 and arm or actuator swap $480-$950.
How we do it
We test the capacitor, limit switches, and control board in that order, replace only the failed component, and photograph the repair before reattaching the cover.
What Gate Motor & Opener Costs in Flower Mound
| Item | Typical range in Flower Mound |
|---|---|
| Swing-gate operator replacement | $1,480-$2,950 |
| Slide-gate operator replacement | $1,750-$3,400 |
| Control board replacement | $350-$800 |
Can you replace a Flower Mound gate motor the same day?
Yes, when the operator is in stock or available from a Dallas-Fort Worth supplier that morning. Flower Mound’s mix of brands means we keep common LiftMaster, BFT, and Linear boards on the truck, which speeds up most same-day motor replacements.
Will the clay soil damage a new operator?
It can, if the post underneath it is moving. We check post plumb before installing any new motor in Flower Mound, because an operator that is mounted square will outlast one bolted to a post that is already three degrees out.
Gate Access Control in Flower Mound
Flower Mound’s HOA-heavy subdivisions mean access control is not just for the gate at the street. It is the keypad the HOA requires on a Bridlewood entry, the phone-entry system on a Wellington service gate, and the remote that stopped working after a power surge. We handle the wiring, the programming, and the documentation. See our Gate Access Control work for detail.
Keypad Entry
Signs you need it
The keypad works intermittently, the buttons stick, or the existing unit is old enough that the HOA has asked for a model with an updated backlit face.
What it costs in Flower Mound
Keypad installation and programming typically runs $350-$900, including the unit, the weatherproof enclosure, and programming for up to four codes.
How we do it
We run low-voltage wire from the keypad to the operator board, mount the keypad at the right height for a vehicle window, and program the codes while you watch.
Remote Control
Signs you need it
Your remotes work from ten feet away but not from the street, or one remote stopped working while the others still function.
What it costs in Flower Mound
Remote programming or replacement runs $75-$250, and receiver upgrades run $250-$550 when the old receiver is too weak for a newer remote.
How we do it
We test the existing receiver’s range, swap in a new remote or receiver, and program the code once rather than telling you to buy a new operator.
What Gate Access Control Costs in Flower Mound
| Item | Typical range in Flower Mound |
|---|---|
| Keypad install and programming | $350-$900 |
| Remote programming or replacement | $75-$250 |
| Receiver upgrade | $250-$550 |
Do I need HOA approval for a new keypad in Flower Mound?
In many Flower Mound subdivisions, yes. The HOA often wants the keypad’s faceplate to match the existing gate hardware. We can provide the spec sheet and a photo of the unit before you submit anything.
Can you add a phone entry system to an existing Flower Mound gate?
Yes, usually in a single visit when the operator is from a major brand like LiftMaster, Linear, or Ghost Controls, because the control board has a dedicated accessory terminal. We run the line, wire the module, and test the call path before we leave.
Gate Parts & Welding in Flower Mound
Flower Mound’s iron gates fail at the joints before they fail anywhere else. Acidic clay soil holds moisture against the bottom rail, and the wet-dry cycle works the welds loose at the hinge side. We repair and replace the parts that actually break. This is our Gate Parts & Welding work.
Hinge Replacement
Signs you need it
The gate sags toward the latch side, scrapes the ground at the far end, or you can see daylight between the hinge barrel and the pin.
What it costs in Flower Mound
Standard hinge replacement runs $250-$500 per pair, with adjustable or decorative hinges reaching $550-$900 when the post is not square.
How we do it
We support the gate with a jack stand, cut or unbolt the old hinges, weld or bolt the new pair at the correct setback, and photograph the final alignment.
Post Replacement
Signs you need it
The post leans more than five degrees off plumb, the concrete at its base is cracked, or the gate has been shimmed twice already and still binds.
What it costs in Flower Mound
Post removal and concrete pour for a new post runs $850-$1,800, depending on the hole depth and whether the old footing is encased in clay that has to be augered out.
How we do it
We dig down past the clay’s active zone, set the new post in fresh concrete with a longer embedment, and brace it square while it cures.
What Gate Parts & Welding Costs in Flower Mound
| Item | Typical range in Flower Mound |
|---|---|
| Hinge replacement | $250-$500 per pair |
| Post replacement with concrete | $850-$1,800 |
| Custom welding repair | $130-$450 per repair |
Can you weld a cracked gate rail in Flower Mound without removing the gate?
Usually, yes. Most bottom-rail cracks and hinge-side fractures can be welded in place with the gate propped and braced. We grind the crack, weld it, and photograph the bead before painting it to match.
How long does a welded repair last on a Flower Mound gate?
A properly ground and welded joint on clean steel will outlast the surrounding metal in most cases. What fails first around here is the hinge or the post, not the weld.
Brands We Service in Flower Mound
We service BFT, Linear, Viking, and Ghost Controls operators, plus the other five major automation brands. Our Dallas-Fort Worth stock covers the common boards and remotes, so most Flower Mound repairs do not wait on a shipment. See our brands page for the full list and what we carry.
Pricing for Gate Repair in Flower Mound, TX
| Service | Typical range in Flower Mound |
|---|---|
| Motor repair diagnostics and work | $145-$470 |
| Control board replacement | $350-$800 |
| Swing-gate operator replacement | $1,480-$2,950 |
| Slide-gate operator replacement | $1,750-$3,400 |
| Keypad install and programming | $350-$900 |
| Remote programming or replacement | $75-$250 |
| Hinge replacement | $250-$500 per pair |
| Post replacement with concrete | $850-$1,800 |
| Custom welding repair | $130-$450 per repair |
Two things push a Flower Mound price toward the high end of these ranges: a post that has drifted far enough to require realignment before the new part fits, and an older operator that needs a board and a limit switch in the same visit. Whatever the number is, you get it in writing before we pick up a tool, and nothing gets added to the invoice after the fact.
Neighborhoods We Serve in Flower Mound
We run calls across all of Flower Mound, from the equestrian side of Bridlewood to the neighborhoods off Morriss Road. Most areas see a technician the same day, with the next day as the outside for scheduled work.
- Bridlewood
- Wellington
- Canyon Falls
- The Villages of Northshore
- Chimney Rock
Service Area - Cities Near Flower Mound
Our Flower Mound crews also cover the surrounding cities, so the same written-price policy and photo documentation apply if you live in Southlake, TX, Grapevine, TX, Lewisville, TX, or Coppell, TX.
Serving Flower Mound, TX - Our Local Coverage Area
We’re based in the Flower Mound area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Flower Mound
For a gate stuck open or a motor that will not respond, we can usually have a technician in Flower Mound within a few hours, same day. A live person answers the phone 24 hours a day, so you will know your arrival window before you hang up.
Most repairs do not need a town permit, but some HOAs in Flower Mound require approval for a replacement gate’s style, color, or automation type. We can provide the photos and spec sheet your HOA committee asks for, and we wait for that approval before ordering custom work.
No. The written price is part of every visit, before any work starts. If you already have a written estimate from another company, bring it to us and we will review it at no cost and tell you honestly whether it is fair.
Call (928) 260-0864 for a free estimate on gate repair, motor service, or access control work in Flower Mound. The price is written down before we start, and you keep the photo record of everything we touched.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Flower Mound Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.