Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across White Plains
Gate repair in White Plains means working on two completely different animals: the ornamental iron swing gates protecting Tudor and Colonial homes in Battle Hill and Fisher Hill, and the commercial sliding gates cycling all day under downtown high-rises. Most swing-gate motor replacements in White Plains run between $480 and $1,150 depending on the operator brand and whether the arm bracket survived the failure. Most hinge and pillar repairs run between $220 and $640 because the work involves resetting mortar and re-plumbing hardware as often as swapping parts.
We dispatch technicians who know the difference between a frost-heaved pillar cap and a worn gearbox, and we show up with parts for both. No voicemail. No callback window. Call (928) 260-0864 and a live person answers, any hour.
Why Vance Gate Repair Is White Plains’s Preferred Gate Repair Company
Vance Gate Repair started in 2014 when Adrian Vance brought the documentation habits of commercial access-control work into residential driveways. That background matters in White Plains specifically. The city’s dual character – dense commercial core and old residential neighborhoods with ornamental iron – means the gate at a downtown parking structure and the gate at a Fisher Hill Colonial fail for opposite reasons, and a technician who only knows one side will misdiagnose the other. Our Gate Repair work covers both.
Every visit ends the same way: you get a written price before we start, and a photo log of what we found, adjusted, and installed before we leave. That’s The Haven Standard, specifically Clause 1 and Clause 4. We don’t ask you to trust our word. We hand you the record. That’s the habit that carried over from commercial access control, and it’s why White Plains homeowners call us after spending time in the forum threads wondering who to trust.
Our technicians are background-checked, uniformed, and you get their name and photo before arrival. We repair all existing automation brands on the property – we don’t steer you toward replacement because we’d rather sell you a new unit. If the motor can be fixed, we fix it.
Our Gate Repair Services in White Plains
Electric Gate Repair
Electric gate systems in White Plains fail most often in February, when the same freeze-thaw cycle that cracks the concrete on Mamaroneck Avenue also seizes a hydraulic operator or blows a capacitor in an electromechanical motor. We diagnose electrical faults at the board level first, not by throwing parts at the problem. A typical control board replacement runs $380 to $720. A seized hydraulic operator is usually a $340 to $580 repair, including fluid service and seal inspection, when caught before the pump burns itself out.
Automatic Gate Repair
Automatic gates in White Plains serve two very different masters. On residential properties, they might cycle four to six times a day. On a downtown condo garage, they might cycle four hundred times a day. That difference dictates the part. A residential swing gate operator should get eight to twelve years out of a properly aligned installation. A commercial-grade slide operator on a downtown garage entry needs rack and pinion re-adjustment or replacement far more frequently, and is repairable in place with the right gear in the truck. We carry parts for both markets on the same van because in White Plains they’re twenty minutes apart.
Hinge & Post Repair
This is the repair that separates experienced White Plains gate technicians from everyone else. The 1920s through 1950s homes along Battle Hill and Fisher Hill sit on land that has settled unevenly for decades, and their wrought iron gates were mounted on mortared brick pillars. When a pillar shifts even a quarter-inch, the hinge side binds. The gate doesn’t sag because the iron bent; it drags because the foundation moved. Repairing that correctly means cutting out the old mortar, re-seating the cap, and re-plumbing the hardware before any limit-switch adjustment happens. Hinge and pillar repair in White Plains typically runs $220 to $640 per gate, depending on whether one or both pillars need re-setting and how much deteriorated mortar needs removal.
Gate Realignment
Realignment follows diagnosis. If the post is plumb and the hinges intact, a dragging gate usually means the operator’s travel limits have drifted or the arm geometry has shifted. We measure the gate at full travel, photograph the limit-switch positions, and note every reading in the job record. A straight realignment with limit-switch reset runs $120 to $280 in White Plains. If the post is out of plumb, the realignment happens after the pillar work, not instead of it. We see far too many gates that were “adjusted” twice by other companies while the foundation problem quietly got worse.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in White Plains
We service nine automation brands, and we keep common White Plains parts on the truck: Ghost Controls, DoorKing, Elite, and Mighty Mule are all in our regular residential loadout, alongside LiftMaster, FAAC, BFT, Linear, and Viking for commercial and larger installations. That matters in a city where a residential Ghost Controls swing opener might sit on the same truck route as a Viking slide operator at a downtown garage. We repair your existing motor. If the brand isn’t made anymore, we adapt the existing arm and bracket rather than replacing the whole system. That’s usually the difference between a $300 repair and a $2,800 gate.
Common Gate Repair Problems We See in White Plains Homes
- Frost-heaved pillars on Battle Hill and Fisher Hill. The mortar on a 1930s brick pillar doesn’t flex; it cracks. A quarter-inch shift is enough to bind the barrel hinges and drop the latch side, especially on double gates with a long unsupported span.
- Salt-rot on ornamental iron near major roads. Gate pickets and latch hardware on properties within a block or two of Mamaroneck Avenue or Central Avenue corrode years faster than the rest of White Plains. We cut out the rotten section and weld in matched stock, then treat and prime it. Repainting is usually a one-weekend homeowner job.
- Photocell trips on downtown parking gates. High cycle counts wear the rack and pinion and loosen the photo-eye alignment. The result is a gate that reverses every few cycles because the safety beam lost its return. That’s a commercial-grade fix, and it’s usually done in one visit.
- Keypad and intercom failures near Central Avenue. Salt and freeze-thaw aren’t kind to exposed keypads. The keypad might test fine on the bench but fail under load when the bus wiring has moisture intrusion from years of spray. We test the wiring before blaming the board.
Pricing for Gate Repair in White Plains, NY
Here’s what White Plains gate repair work actually costs. Residential swing gate motor replacements run $480 to $1,150, including the operator, the bracket, and the travel-limit set. Hinge and pillar re-setting runs $220 to $640 per gate. Control board replacements run $380 to $720. Photocell and safety-loop replacements run $180 to $340 per sensor. Realignment with limit-switch reset runs $120 to $280. These are written numbers, agreed before we pick up a tool, not estimates that drift upward by the afternoon. The price you approve is the price you pay. Call (928) 260-0864 for a written quote – estimates are free, and every quote is in writing before the job starts.
We Also Serve Cities Near White Plains
Vance Gate Repair serves White Plains and the surrounding communities, including Harrison, Yonkers, New Rochelle, and Mount Vernon. Whether you’re in Battle Hill or a neighboring town, our Gate Repair in White Plains crews are dispatched from our New York City office and reach the area promptly. Call (928) 260-0864 to schedule.
Serving White Plains, NY - Our Local Coverage Area
We’re based in the White Plains area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs — Gate Repair in White Plains
The freeze-thaw cycle is heaving your gate posts. When groundwater freezes under a shallow footing, it lifts the post a fraction of an inch. A quarter-inch shift is enough to bind the hinge side or drop the latch side so the gate drags the apron. The fix is re-plumbing the pillar cap and re-setting the hardware – not adjusting the gate to compensate for the shift. We inspect the pillar foundation, photograph the readings, and re-set everything to plumb before touching the operator limits. Call (928) 260-0864 and ask for a pillar inspection; the diagnostic is free.
Yes. Most gate intercoms and camera systems in White Plains are add-on modules that talk to the operator through a relay or bus input, not a proprietary system. If your operator is from DoorKing or Ghost Controls, the intercom usually wires in directly. We identify the existing control board terminals, add the new entry hardware, and photograph every connection before closing the panel. The job record shows exactly what was added and where, so the next technician never has to guess. Call (928) 260-0864 for a written quote on matching entry hardware.
It’s a cycle-count problem, and it’s common in White Plains specifically because the downtown garage gates cycle hundreds of times daily. The rack and pinion wear unevenly, the photocell mounts loosen, and the beam drifts out of return alignment. Fixing it means re-setting the rack alignment, tightening the photo-eye mount, and re-lining the beam. It’s a commercial-grade repair using commercial-grade parts, and we carry them in the same van we use for residential work. Call (928) 260-0864 and describe the gate’s cycle behavior before we arrive. It speeds up the diagnosis.
Check the hinge post. Not the hinge barrels, not the operator, not the latch. In White Plains, a sagging ornamental iron gate on a 1930s-1950s property usually means frost heave has shifted the post off-plumb. If the post is plumb, then you’re looking at a worn hinge or a bent leaf. We check the post first because it’s the most common local cause, and because adjusting the gate hardware without fixing the post just means it sags again. Call (928) 260-0864 and we’ll check it with a level and give you a written finding.
Check for moisture intrusion in the keypad wiring first, especially if the property is within a block or two of a heavily salted road. Road spray gets into the bus connections and the keypad tests fine on a bench but fails under load in the field. The next check is the antenna and receiver range, then the control board input. We perform these tests in that order because it’s the order that identifies the cheapest and most common fix first. Call (928) 260-0864 and describe exactly what the keypad does when you enter the code. It helps us arrive with the right parts.
Written by Adrian Vance, Owner at Vance Gate Repair, serving White Plains gate repair customers since 2014.