Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Unionport
Most gate repairs in Unionport are not hinge replacements or motor swaps. They are gates that have torn free of the brick holding them. The neighborhood’s 1920s-1950s row houses and apartment buildings anchor gates into mortar that has been spalling for decades, and when that mortar lets go, the gate drops, drags, or swings loose. Our crews see it on stoops near White Plains Road, on areaway gates off Castle Hill Avenue, and on storefront gates along Westchester Avenue. We fix the masonry first, then the hardware. Call (928) 260-0864 and a live person answers, day or night.
Why Vance Gate Repair Is Unionport’s Preferred Gate Repair Company
Homeowners in Unionport call us because we write the price down before we touch anything. That is Haven Standard Clause 1, and it applies on every job. You get a flat number for the hinge post rebuild or the track realignment, not a verbal estimate that drifts upward. After the work, you get a photo log of what we found, what we reset, and what we replaced. That is Clause 4, evidence on every job, and it matters more in Unionport than almost anywhere else because so much of the work is buried in old brick and concrete where you cannot see it.
We have repaired more than 22,000 gates since Adrian Vance started the company in 2014, and the Unionport call patterns are consistent: hinge plates sheared from pilasters, sagging swing gates on shared driveways, and slide gates binding on salt-corroded track. A background-checked, uniformed technician arrives with a name and photo sent before dispatch. The 365-Day Done Right Promise covers every repair for a full year, no argument and no second invoice.
Our Gate Repair Services in Unionport
Hinge & Post Repair
This is the core of gate repair in Unionport. When a wrought-iron or tubular-steel gate pulls away from its post, the fix is not a bigger hinge. It is a rebuilt anchor point. We reset hinge posts in new concrete footings, re-drill plates with epoxy anchors rated for the soft, aged brick common to Unionport row houses, and rebuild the spalled mortar so the plate has something solid to hold. A gate re-anchored properly will outlast the original installation.
Gate Realignment
Freeze-thaw cycles heave the concrete thresholds under Unionport gates, and the gate starts dragging at the latch or binding mid-swing. We realign by adjusting the hinge geometry and, where needed, grinding or shimming the threshold so the gate clears it. On shared driveways, we keep the gate swinging clean so the neighbor’s access is never blocked during the work.
Weld & Rust Repair
Bronx road salt reaches farther than people think. It drifts onto stoops and entry gates along Unionport’s residential streets and sits in the bottom rails of tubular-steel gates until the metal thins and cracks. We grind out rust, weld reinforcement where the structure is still sound, and treat the surface so the repair holds. When a hinge barrel or latch bracket is too far gone, we cut it out and weld in a new section rather than replacing the whole gate.
Electric Gate Repair
Automatic gates in Unionport run on motors from Ghost Controls, DoorKing, Elite, Mighty Mule, and several other brands, and we service whatever is already on the property. Common failures here are photo-eyes knocked out of alignment by a misaligned gate, limit switches set past travel, and corroded wiring at the post. We read the existing settings, photograph them, make the correction, and leave you a written record of what was changed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Unionport
We work on nine gate-automation brands, including Ghost Controls, DoorKing, Elite, and Mighty Mule. That breadth means we are not steering you toward a new motor because we only know one brand. We diagnose the motor, the board, the limit switch, and the wiring, and we carry common parts in the truck. Many Unionport repairs are completed same-day because the part is already on hand.
Common Gate Repair Problems We See in Unionport Homes
- Hinge plates sheared from spalling brick pilasters. The plate is original, the brick is 70-plus years old, and the mortar behind it has turned to powder. The gate drops and the latch misses by an inch or more.
- Post footings heaved by freeze-thaw. Unionport winters cross 32°F dozens of times, and the concrete around gate posts expands and contracts until the post leans and the gate drags at the latch.
- Slide gates binding on salt-corroded rack and pinion track. Road salt from Bronx streets works into the track of slide gates spanning narrow areaways, and the gate starts stalling or reversing mid-travel.
- Masonry repair done wrong by general contractors. We see gates re-anchored with standard concrete anchors into old brick, which pull out again within a season. Epoxy anchors and a proper footing are the difference between a two-year fix and a twenty-year fix.
Pricing for Gate Repair in Unionport, NY
A hinge-plate re-anchor into brick in Unionport typically runs $280-$480 per plate, including the epoxy anchors, mortar rebuild, and photo documentation. A full gate realignment on a sagging swing gate runs $220-$380, depending on whether the threshold needs grinding or the post needs shimming. Weld repair for a rusted bottom rail or broken latch bracket runs $180-$350 per section. Electric gate diagnosis and repair runs $190-$390 before parts, and most motor replacements for a single swing gate run $750-$1,400 installed, depending on brand and whether the arm bracket is intact. Every price is written and agreed before any work starts, and the number on the page is the number on the invoice.
We Also Serve Cities Near Unionport
Our crews work throughout the Bronx and the surrounding boroughs. Along with Unionport, we handle Gate Repair calls in New York City, Brooklyn, Queens, and Manhattan. If you are on the edge of Unionport near the Bronx River or West Farms, the same team and the same written-price policy apply.
Serving Unionport, NY - Our Local Coverage Area
We’re based in the Unionport area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Unionport
Because the brick and mortar holding the hinge plate are 70-plus years old and actively deteriorating. The hinge itself is usually fine; the anchor point has failed. Fixing it properly means resetting the post or re-drilling the plate with epoxy anchors rated for soft, aged brick, then rebuilding the mortar. A new hinge bolted into the same crumbling brick will pull out again within a year or two. Call (928) 260-0864 for a written quote on the full anchor rebuild.
Yes. We keep the gate in the open position during the work and lay out our tools so the neighbor’s car can pass. For slide gates on shared driveways in Unionport, we often replace the rack section or clean and lubricate the track in place rather than pulling the whole gate off its rail, which keeps the repair contained and the access clear. The price is written before we start, so the neighbor knows what is happening and what it costs.
No, not on a ground-floor commercial storefront facing a public street. NYC Local Law 45 from 2011 requires solid roll-down security gates to be replaced with open-mesh or see-through gates. We still see non-compliant solid gates on Unionport commercial strips, and we handle the replacement, including the new track installation, the open-mesh curtain, and the motor hookup where the gate is automated. The price is written and agreed before the old gate comes off.
It usually means the photo-eye, the infrared beam that stops the gate if something crosses its path, is misaligned or the safety edge is reading resistance from a gate that is dragging on the threshold. In Unionport, both are common: the gate drops as the post heaves, and the beam no longer lines up. The fix starts with a diagnostic call, and the exact price is written before any adjustment is made. Call (928) 260-0864 to schedule it.
Often yes. If the post is still solid and the issue is worn hinge barrels or a bent hinge leaf, we realign the gate and replace the hinge hardware. If the post itself has shifted from frost heave, we may be able to shim and reset it without a full concrete pour. We will tell you which one it is, show you photographs of what we found, and give you a written price for the lesser job before any work begins.
If you live in Unionport and your gate is pulling away from the brick, dragging on the threshold, or stalling mid-travel, call Vance Gate Repair at (928) 260-0864. A live person answers 24 hours a day. You will get a written price before any work starts, a photo record when the job is done, and a full year of coverage under the 365-Day Done Right Promise.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Unionport and the surrounding Bronx since 2014.