Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Tujunga
When a gate stops working in Tujunga, it’s rarely a small thing. The wind coming down Tujunga Canyon takes a misaligned hinge and turns it into a torn post footing within a season, and an operator that fights that wind burns through its gears long before its rated life. Most gate repair in Tujunga runs between $185 and $640, depending on whether we’re re-plumbing a post, replacing a hinge, or swapping an operator. We dispatch crews from our Los Angeles office into Tujunga daily, and a live person answers (928) 260-0864 around the clock, every day of the year.
We know the difference between a gate that’s simply old and a gate that Tujunga’s canyon wind has been working on for twenty years. That distinction is what keeps a $280 hinge repair from becoming a $1,400 post replacement six months later.
Why Vance Gate Repair Is Tujunga’s Preferred Gate Repair Company
Tujunga homeowners tend to do their homework before they call anyone. They’ve already read the reviews, already looked at the brand of motor on their gate, already measured how far the gate has drifted out of square. What they want from us is a written price before a single tool comes out of the truck, and a record of what we found and what we did when the job is finished. That’s Gate Repair under what we call the Haven Standard, and it’s the same documentation habit Adrian Vance built doing commercial access-control work starting in 2014.
On every visit to Tujunga, we leave a photo log showing the worn hinge, the shifted post, the limit-switch reading before and after. We hand over a written scope and a written flat price before work starts. Not an estimate. A price. Under our 365-Day Done Right Promise, if that repair is not right within a full year, we make it right with no argument and no additional fee.
Our technicians are background-checked and uniformed, and you get a name and photo before arrival. No mystery crew, no voicemail loop. Just a prepared technician and a documented job.
Our Gate Repair Services in Tujunga
Electric Gate Repair
Tujunga’s Santa Ana events put electric gates under load that flatland installs never see. A motor that works fine in Burbank gets overworked in Tujunga when sustained gusts force the gate against its stops while the operator is still trying to close it. We diagnose motor wear against wind load, not just against age, and we test limit switches and photo-eyes under actual operating conditions before we call the repair finished.
Automatic Gate Repair
Automatic operators in Tujunga fail most often from over-torque: the motor fights a wind-battered gate that has drifted out of alignment, and the gear train gives up. When we service a Viking, Ghost Controls, LiftMaster, or DoorKing unit up here, we set the travel limits to the actual closed position of the gate, not the position the manufacturer’s default assumes. That distinction is the difference between a repair that lasts and a repair that gets repeated after the next wind event.
Hinge & Post Repair
This is the most common work we do in Tujunga, because canyon wind doesn’t break gates directly. It torques them. Hinge bolts shear. Post anchors loosen. Gates sag until the latch side drags on the concrete or dirt. We re-plumb posts in new concrete footings when they’ve shifted, replace torn hinges with heavier-rated hardware, and realign the leaf so the operator is no longer fighting the gate’s own weight. On horse properties and rural parcels along the northern edge near Shadow Hills, we regularly see post issues that have been developing for decades.
Gate Realignment
Most “broken” gates in Tujunga are not broken. They are out of square, and the operator is stalling against a bind. We realign swing and slide gates, reset the operator limits, and photograph the corrected positions so there is a written record of what changed. If the same drift returns, the record makes the next service call faster and cheaper, not a repeat of the same diagnosis.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Tujunga
We service Viking, Ghost Controls, DoorKing, Elite, and five other major gate-automation brands. That matters in Tujunga because the housing stock is older and mixed, and we routinely find three different motor brands on a single street. We do not steer you toward a new operator when the existing unit can be repaired. If a part number is needed, we identify it, price it in writing, and put it in the job record. No guessing, no brand-bias upsell.
Common Gate Repair Problems We See in Tujunga Homes
- Santa Ana wind torque on hinge posts. Sustained gusts off Tujunga Canyon push a wide swing gate against its hinges until the post leans, and a leaning post turns every opening into a grind. We typically need to re-plumb or re-foot the post before any hinge work makes sense.
- Operator burnout from wind-driven gates. An automatic operator’s limits assume the gate moves freely. When Tujunga wind holds the gate in place for seconds at a time, the motor overheats and the gears strip. We set limits to the gate’s actual travel, not the factory default.
- Thermal expansion and contraction. Daytime heat on the sun-baked canyon floor followed by cooler mountain nights makes metal gate frames expand and contract enough to loosen post anchors over time. Ranch homes and bungalows from the 1940s through 1960s often carry hardware that has never been re-torqued.
- Misaligned safety photo-eyes. A photo-eye, which is the infrared beam that stops the gate if a person, car, or animal crosses the path, gets knocked out of alignment as the gate racking shifts the post it is mounted on. The gate then reverses or stalls for no apparent reason.
Pricing for Gate Repair in Tujunga, CA
Here are real numbers for what Tujunga gate repairs cost, based on our recent work in the area:
- Hinge replacement on a standard swing gate: $185-$340
- Hinge post re-plumb with new concrete footing: $420-$640
- Swing gate realignment (single leaf): $190-$310
- Automatic operator or motor replacement: $540-$1,100
- Photo-eye or limit switch repair: $160-$280
- Solar panel and battery service for off-grid openers: $230-$480
The range depends on the gate’s width and weight, whether the post needs excavation or just re-setting, and the brand of operator currently mounted. You always get the exact flat price in writing before any work begins, and the price we quote is the price you pay. Estimates are free. Call (928) 260-0864 to schedule one, or to bring a written quote from another company for a no-cost second opinion.
We Also Serve Cities Near Tujunga
Our Gate Repair crews handle the corridor down the hill from Tujunga into the Valley, including Burbank, Glendale, North Hollywood, and San Fernando. Call (928) 260-0864 and a live person answers, day or night.
Serving Tujunga, CA - Our Local Coverage Area
We’re based in the Tujunga area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Tujunga
Santa Ana winds measurably shorten an operator’s life in Tujunga by forcing the motor to work against a gate being held by wind pressure, which overheats the windings and strips gear teeth. We can’t change the wind, but we can set the torque limits and travel stops so the operator is not fighting the gate, and we can recommend heavier hinge hardware that reduces wind-induced racking. Call (928) 260-0864 and we’ll assess your exact set-up.
Yes. For gates being rebuilt in Tujunga’s Very High Fire Hazard Severity Zone, we quote steel or aluminum frames and cladding that comply with LAFD ignition-resistant material standards, rather than defaulting to wood. We bring the compliance discussion to the first visit so you’re not surprised by code later. Call (928) 260-0864 for a written quote on a compliant replacement.
In nine out of ten Tujunga cases, the post has leaned rather than the panel failing. Wind torque pulls the hinge post out of plumb, and the gate leaf follows it down. We measure with a level, photograph the reading, and tell you plainly whether the fix is re-hanging the leaf or re-footing the post. Call (928) 260-0864 and we’ll diagnose it precisely.
Yes. Much of Tujunga’s rural and acreage inventory, especially north toward Shadow Hills, runs solar because mains power was never pulled to the gate. We service solar panels, batteries, charge controllers, and the operators on those systems, and we document every reading. Call (928) 260-0864 to schedule a solar gate service call.
On windy days in Tujunga, the usual cause is a misaligned photo-eye or a gate leaf that has racked slightly under load, which makes the operator think something is in the path. We test the photo-eye alignment and the gate’s geometry together, because in canyon wind they fail together. Call (928) 260-0864 and we’ll find which one is the actual fault.
Contact Vance Gate Repair for Gate Repair in Tujunga
If a gate is dragging, a motor is stalling, or a post has pulled out of plumb in Tujunga, call (928) 260-0864. A live person answers, any hour, any day. We’ll talk through what you’re seeing, schedule a visit, and hand you a written, flat price before any work begins. That is the only way we do it.
Written by Adrian Vance, Owner at Vance Gate Repair.