Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Greenburgh, NY
Most gate motor failures in Greenburgh follow the same pattern: a freeze-thaw cycle shifts the post, the gate drags, and the motor burns out fighting the misalignment. We open swing gates on Edgemont estate pillars and slide gates on Hartsdale driveways, diagnose the exact failure, and hand you a written price before we touch a wrench. Call (928) 260-0864 when the gate stops moving and we’ll have a background-checked technician named and dispatched to your Greenburgh address the same day.
Why Greenburgh Homes Are Different
Greenburgh’s unincorporated residential sections, especially Edgemont and Hartsdale, hold an unusual concentration of 1920s through 1950s estate-era properties. The original ornamental wrought iron and steel gates on these homes still hang between fieldstone or brick pillars, and many of them are now 70 to 100 years old. These are not catalog-part installations. The hinge pintles were often set directly into the stone using lead-poured sockets, a period method that makes standard hinge replacement impossible without re-casting the pintle or core-drilling the pillar face. When a modern electric opener gets retrofitted onto one of these assemblies, the permit runs through Westchester County’s building department, not a village office. Neighboring incorporated villages handle their own approvals, but unincorporated Greenburgh answers to the county, and that single authority governs a density of aging estate gates you won’t find matched in the surrounding municipalities. Add the freeze-thaw action on the clay-bearing soils along the Saw Mill and Bronx River corridors, and you get gate posts that heave out of plumb most winters, leaves that pull the gate out of alignment every spring, and latch failures that recur seasonally rather than resolve with one repair.
Our Main Greenburgh Services
Greenburgh homeowners call us most about two things: getting an existing gate working again and replacing a gate that has outlived its structure.
Gate Repair in Greenburgh
Most repair calls in Greenburgh start with a gate that drags, a motor that hums but won’t move, or a latch that won’t catch. On older estate properties, the root cause is often a post that has shifted out of plumb from years of freeze-thaw cycles, not a motor that quit. We measure the actual misalignment, identify what moved, and tell you what it will take to fix the gate so it stops failing every season. Full details are on our Gate Repair in Greenburgh page, including the county permit realities for structural work on unincorporated properties. Every repair gets a written price before work starts and a documented photo record when we’re finished.
Gate Installation in Greenburgh
New gate installation in Greenburgh means working with the county building department from the first day. Setback requirements, post footing depth, and stormwater considerations all run through Westchester County for unincorporated sections, and we handle the permit paperwork as part of the job. Whether you’re replacing a rotted post-and-rail arrangement or installing a new motorized entry on a fresh driveway, we spec the gate, the motor, the footings, and the power run before we dig. See Gate Installation in Greenburgh for the full scope, including the documented photo record you receive at every stage.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Greenburgh
A gate motor that fails in Greenburgh rarely fails alone. It’s usually the casualty of a post that shifted, a hinge that froze, or a limit switch someone set wrong two winters ago. We service motors from DoorKing, Elite, Mighty Mule, and Ghost Controls without steering you toward a replacement unless the motor is genuinely dead. Our Gate Motor & Opener work covers the full electrical and mechanical path from the board to the gate leaf.
Motor Installation
Signs you need it
The motor hums but the gate doesn’t move, or the gate trips its breaker every time you press the remote.
What it costs in Greenburgh
New swing-gate motor installation in Greenburgh typically runs $1,800 to $3,400, depending on gate weight and whether the arm bracket is still intact.
How we do it
We measure the gate weight and cycle count, match the motor to the load, install with a new bracket, then photograph the complete setup and record the limit-switch readings.
Motor Repair
Signs you need it
The opener makes a grinding noise, moves the gate halfway, or no longer responds to the remote or keypad.
What it costs in Greenburgh
Gate motor repair in Greenburgh usually lands between $250 and $700, depending on whether the issue is a capacitor, a limit switch, or a stripped gear.
How we do it
We run voltage checks at the board and the motor, isolate the failed component, replace it, and photograph the repair plus the new part number.
What Gate Motor & Opener Costs in Greenburgh
| Item | Typical range in Greenburgh |
|---|---|
| Motor repair | $250 - $700 |
| Swing-gate motor installation | $1,800 - $3,400 |
| Slide-gate motor installation | $2,200 - $4,200 |
How long does a gate motor last in Greenburgh?
Between 8 and 12 years under normal Greenburgh conditions, but freeze-thaw cycles and post misalignment shorten that run. We check the motor’s draw every visit so you know how much life remains before a failure leaves the gate stuck.
Do you replace motors on old estate gates?
Yes. We frequently retrofit modern openers onto 1930s and 1940s gates in Edgemont and Hartsdale, working around the original stone pillars without disturbing the period masonry unless structural work is unavoidable. Call for a written quote before any work starts.
Gate Access Control in Greenburgh
Access control on a Greenburgh home means more than a keypad. On an estate driveway with a long set-back from the road, you want to know who is at the gate and be able to open it without walking down the drive. We install and service keypads, remotes, phone entry, and video intercoms that integrate with the motor and the Gate Access Control hardware already on your property.
Keypad Entry
Signs you need it
The keypad lights up but won’t release the gate, or it only works from two feet away.
What it costs in Greenburgh
Keypad replacement or new installation in Greenburgh runs $450 to $1,200, depending on wireless range and whether we need to trench a new low-voltage line.
How we do it
We test the keypad output at the board first, then either program a replacement or pull a new run, and photograph the wiring terminations for the record.
Video Intercom
Signs you need it
The intercom rings but there is no picture, or the picture freezes every time the gate motor activates.
What it costs in Greenburgh
Video intercom installation at a Greenburgh driveway gate typically starts at $950 and runs to $2,600, depending on camera type and whether we tie into existing wiring or run new cable.
How we do it
We replace the camera or the power supply as the test readings indicate, set the viewing angles, and photograph the completed installation with the wiring schematic noted.
What Gate Access Control Costs in Greenburgh
| Item | Typical range in Greenburgh |
|---|---|
| Keypad entry | $450 - $1,200 |
| Video intercom | $950 - $2,600 |
| Phone entry system | $850 - $2,200 |
Can I add a video intercom to an old gate system?
Usually yes, as long as the gate motor control board has a free auxiliary input. On older estate properties in Greenburgh we often wire a standalone intercom that works alongside the existing opener. Call for a written quote.
Do you program remotes for gates you didn’t install?
Yes. If the board is healthy, we can add or clear remotes and keypad codes for most brands in one visit, including DoorKing and Ghost Controls, and we photograph the programming confirmation before we leave.
Gate Parts & Welding in Greenburgh
On an Edgemont wrought iron gate from 1938, the hinge is not a part you order. It is often a pintle cast into a stone pillar, and replacing it requires either re-casting the metal or core-drilling the stone. That is the reality of Gate Parts & Welding in Greenburgh, and it’s why we keep welding and fabrication in-house rather than sending the work out. We repair what’s already there, match the metal, and leave a photographed record of every weld and part on file.
Hinge Replacement
Signs you need it
The gate sags toward the latch side, or you can see daylight between the hinge leaf and the pillar.
What it costs in Greenburgh
Standard weld-on hinge replacement in Greenburgh runs $320 to $800 per hinge, while lead-poured pillar hinges start at $900 due to the stone work involved.
How we do it
We cut out the failed hinge, fabricate or re-cast the replacement, weld it in place, and photograph the finished weld with a measurement of the gate’s new sag.
Custom Welding
Signs you need it
Pickets are snapped at the rail, or the gate frame is rusted through at the bottom corner.
What it costs in Greenburgh
Custom welding repair on Greenburgh ornamental gates runs $350 to $1,200 depending on the length of the crack and how much material must be replaced.
How we do it
We grind back to clean metal, cut out the rotted section, weld in a matching replacement, and photograph the repair from multiple angles for the record.
What Gate Parts & Welding Costs in Greenburgh
| Item | Typical range in Greenburgh |
|---|---|
| Hinge replacement (standard weld-on) | $320 - $800 per hinge |
| Hinge replacement (lead-poured pillar) | $900+ per hinge |
| Custom welding | $350 - $1,200 |
Can you match the original ironwork on an estate gate?
We match the existing material and profile as closely as possible, and on Edgemont and Hartsdale estate gates we will re-cast a pintle or fabricate a matching picket rather than swap in a modern approximation. The photograph record shows you the match before we paint.
Do you replace gate posts that have heaved out of plumb?
Yes. We pull the old post, reset the footing to the correct depth for Greenburgh clay-bearing soil, and either set a new post or rework the stone pillar. Call (928) 260-0864 for a written scope before any digging starts.
Brands We Service in Greenburgh
We work on motors, boards, and remotes from DoorKing, Elite, Ghost Controls, and Mighty Mule, among nine brands total. Common parts stay stocked in the van, which means most Greenburgh motor and access-control repairs are completed on the first visit. See our brands.
Pricing for Gate Repair in Greenburgh, NY
| Service | Typical range in Greenburgh |
|---|---|
| Motor repair | $250 - $700 |
| Swing-gate motor installation | $1,800 - $3,400 |
| Slide-gate motor installation | $2,200 - $4,200 |
| Keypad entry | $450 - $1,200 |
| Video intercom | $950 - $2,600 |
| Phone entry system | $850 - $2,200 |
| Hinge replacement (standard weld-on) | $320 - $800 per hinge |
| Hinge replacement (lead-poured pillar) | $900+ per hinge |
| Custom welding | $350 - $1,200 |
| Post replacement | $1,200 - $3,800 |
What pushes a Greenburgh price upward: a lead-poured hinge on a stone pillar, a post that has heaved out of plumb and needs a new footing, or county permit work that requires an engineer’s note. Every price on this page is a starting range. The written quote you receive before work starts is the number, no adjustment after the fact.
Neighborhoods We Serve in Greenburgh
We dispatch technicians across unincorporated Greenburgh and its villages daily. Response time is usually same day or next morning for the neighborhoods below, depending on the time of year.
- Edgemont
- Hartsdale
- Fulton Park
- North Elmsford
- Fairview
Service Area - Cities Near Greenburgh
Our dispatch center in the New York City office coordinates Greenburgh jobs, and we regularly send the same technicians to nearby areas. Gate repair and access-control work covers New York City, NY, Brooklyn, NY, Queens, NY, and Manhattan, NY.
Serving Greenburgh, NY - Our Local Coverage Area
We’re based in the Greenburgh area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Greenburgh
Same day in most cases. We dispatch from the New York City office, and technicians carry common motors, boards, and hinges for Greenburgh’s older gates. You’ll have a name and photo of your technician before arrival.
Often yes, when the work touches post footings, structural members, or a new motor with a power run. Unincorporated Greenburgh answers to Westchester County, not a village building department. We handle the permit paperwork as part of the written scope.
The price we hand you in writing before any work starts is the complete price for that scope. If the technician finds something outside the scope, we stop, photograph what we found, and hand you a new written number before continuing. No surprise invoice.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Greenburgh Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.