Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Hollywood
A gate that won’t close in Hollywood isn’t a minor annoyance. It’s a security gap on a property that probably already has cameras, intercom wiring, and a motor older than the car in the driveway. We fix gates in Hollywood the same day you call in most cases, and we hand you a written price before any tool comes out. Call (928) 260-0864. A live person answers at any hour, and we dispatch technicians who know the difference between a Hollywood Hills slide gate that’s binding because the post shifted and a flatland swing gate that just needs a hinge re-welded.
Why Vance Gate Repair Is Hollywood’s Preferred Gate Repair Company
Since 2014, Adrian Vance has run this company on a commercial access-control habit: document everything, price everything in writing, and leave a record the next technician can actually use. That’s what Hollywood homeowners get on every visit. The quote is written and handed to you before work starts, not after. You get a photo log of what we found, what we adjusted, and what we installed. And if the repair isn’t right, the 365-Day Done Right Promise means we make it right within a full year, no argument and no fee.
Hollywood customers call us for two reasons. First, we service nine automation brands including Ghost Controls, DoorKing, and Elite, so we work on the motor you already have instead of pushing a replacement. Second, our technicians arrive with a digital level, a clamp meter, and a camera. On a hillside call that matters. Before we touch a motor, we check whether the post has moved. It’s the fastest way to find the real problem instead of the symptom.
We serve all of Hollywood, from the flatland streets of the 1920s Spanish Colonial neighborhoods up through the Beachwood Canyon and Laurel Canyon corridors. Dispatch for Hollywood runs from our Miami (South FL) coordination office, but the crews arrive locally and know the terrain.
Our Gate Repair Services in Hollywood
Most Hollywood gate failures fall into a handful of categories. Here’s what we actually do on site, and how each one plays out in this city’s housing stock. If you need a full picture of our capabilities, our Gate Repair team covers everything from small pedestrian gates to full driveway automation.
Electric Gate Repair
Electric gates in Hollywood’s flatland neighborhoods often run on automation that was installed ten or fifteen years ago, when video-intercom integration was a luxury add-on. We diagnose control boards, limit switches, loop detectors, photo-eyes, and wiring without replacing parts that still work. A typical electric gate repair in Hollywood runs $185 to $420 depending on whether the issue is a misaligned sensor, a failed capacitor, or a control board that needs replacement.
Automatic Gate Repair
Automatic gate repair in Hollywood covers the operator, the arm or rack, and the safety edges. On hillside lots, the operator often works harder than it was designed to. A 12% grade means the motor pulls against gravity on every cycle. We see stripped gears, burned transformers, and arms that have bent at the pivot. We rebuild what’s rebuildable and tell you honestly when a new operator is the cheaper long-term answer.
Hinge & Post Repair
Original wrought-iron pedestrian gates from the 1920s through 1940s are common in Hollywood’s Spanish Colonial Revival and Mediterranean flats. The ironwork is often beautiful and worth saving. The hinge pins are usually the failure point: corroded, worn, or snapped from decades of marine-adjacent moisture. We weld, re-pin, and re-hang rather than replace. Post repair is different. In the Hills, a concrete post that has tipped even 2 degrees off plumb will bind rollers and throw the gate out of square. We re-plumb posts, pack footings, and set the gate back to factory geometry.
Gate Realignment
This is the single most common repair call we get from Hollywood Hills homes. Minor seismic settling and seasonal soil movement shift posts a few degrees. A slide gate’s track then binds. A swing gate drifts open under its own weight. Realignment means measuring the post’s true vertical with a digital level, adjusting rollers or hinges, re-setting limit travel, and photographing the final position so the next service visit starts from a known baseline. Most realignment jobs in Hollywood run $160 to $340.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Hollywood
We repair whatever motor is already on your Hollywood property. DoorKing and Elite operators are common on flatland lots with square footage for swing gates. Ghost Controls and Mighty Mule appear frequently on newer Hills installations and DIY-era retrofits. We also work regularly on FAAC, LiftMaster, BFT, Linear, and Viking. Because we service all nine brands, we don’t steer you toward a replacement just because a competitor only carries one line. Parts for common Hollywood failures, track wipers, photo-eye lenses, limit switches, and hinge pins, are typically on our trucks or sourced same day from local suppliers.
Common Gate Repair Problems We See in Hollywood Homes
- Hillside post creep: Soil movement and minor seismic activity tip gate columns out of plumb. The gate then binds on the track or drifts open. We check post vertical with a digital level on every Hills visit, not just the motor.
- Santa Ana wind damage: Wind funneling through Laurel, Cahuenga, and Beachwood Canyon corridors drives debris into slide-gate tracks and stresses cantilevered swing gates hard enough to bend pivot arms and strip operator gears.
- UV-degraded seals and finishes: Hollywood’s dry heat and intense sun break down neoprene motor seals and rubber track wipers faster than expected. A cracked seal lets dust into the motor housing. A worn wiper lets the gate grind the track.
- Corroded original hinges: On 1930s-era wrought-iron pedestrian gates in the flats, hinge pins and bracket welds corrode from decades of moisture. The iron is almost always restorable. The hinge is usually not.
Pricing for Gate Repair in Hollywood, FL
Here are the numbers we quote most often in Hollywood. A basic gate realignment runs $160 to $340. Hinge repair or re-pinning on a pedestrian gate typically runs $120 to $280. Electric gate diagnosis and minor repair (sensor, limit switch, capacitor) runs $185 to $420. A full swing-gate operator replacement on a flatland Hollywood lot runs $850 to $1,600 depending on brand and whether the existing arm bracket is reusable. A hillside slide-gate operator with a rack and pinion drive runs higher, usually $1,200 to $2,400, because the grade puts more load on the motor and often requires rail or post work at the same time.
Every price is quoted and agreed in writing before work starts. No invoice surprises. We also offer a free second opinion on any written estimate from another Hollywood gate company. Bring the paperwork and we’ll review it at no cost.
We Also Serve Cities Near Hollywood
Our Gate Repair in Hollywood coverage extends to surrounding communities. We serve North Miami Beach, Fort Lauderdale, Miami Gardens, and Plantation with the same written-pricing standard and same-day dispatch when the schedule allows. If you’re just outside Hollywood and have a gate acting up, call (928) 260-0864 and we’ll tell you honestly whether we can get a technician to you today.
Serving Hollywood, FL - Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Hollywood
A jammed slide gate after seismic activity or rain is almost always post movement. Hillside soil swells and settles, and minor shaking tips the post a degree or two off vertical. That small shift binds the gate’s rollers on the track. The fix is re-plumbing the post and re-setting the gate, not lubricating the track. Call (928) 260-0864 for a written quote on the realignment.
You can almost always repair it. The iron itself survives. What fails is the hinge pin, the bracket weld, or the lower pivot. We cut out the corroded section, weld in a new hinge assembly, re-pin it, and touch up the finish. Replacement is rarely necessary unless the frame is cracked through in multiple places. We’ll tell you which one applies before any cutting starts.
The gate drifts open because the post has tipped out of plumb and gravity is pulling the leaf downhill, or the operator’s internal brake is worn. On a steep grade, both happen together. Our technician checks post vertical first, then tests the operator’s holding torque. The repair is usually post realignment plus a brake adjustment or operator rebuild, not a full replacement. Call (928) 260-0864 for an exact diagnosis and a written price.
Yes. We service LiftMaster and BFT operators regularly, including older integrated video-intercom setups where the gate control board ties into a camera and phone line or IP connection. The common failure is usually the control board relay or a sensor, not the intercom itself. We diagnose the board, test the photo-eyes and loop detector, and repair what’s failed without replacing the whole system.
We answer honestly based on what we find. If the board, motor, and gear train are intact, repair is usually the cheaper answer now. If the gear train is stripped, the board is obsolete and can’t be sourced, and the motor windings show heat damage, replacement is cheaper than throwing parts at a dead platform. We’ll show you the failed component in photos and give you both prices in writing so you can decide with evidence, not a sales pitch. Call (928) 260-0864 and we’ll put a technician on it.
One more thing. On a steep Beachwood Canyon driveway with a 12% grade, our tech found a slide gate that had chewed through its lower track wiper and a FAAC operator whose rack and pinion was skipping because the post footing had shifted just 2 degrees. We re-plumbed the post, packed the footing, replaced the wiper, re-timed the loop detector, and the gate ran silent without replacing the board. That’s the difference between diagnosing the foundation and diagnosing the symptom.
If your gate is acting up anywhere in Hollywood, call (928) 260-0864. We’ll answer, ask a few questions, and give you a straight answer about whether we can be there today.
Written by Adrian Vance, founder of Vance Gate Repair, serving Hollywood, FL with documented gate repair since 2014.