Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Hollywood
Gate repair in Hollywood splits into two very different jobs depending on whether you live in the flats or up in the Hills. If you’re off Franklin or Hollywood Boulevard, you’re likely dealing with a 1920s-1940s wrought-iron pedestrian gate with corroded hinges or an aging automatic operator. If you’re above Sunset on a hillside parcel, the more common call is a slide gate binding on its track because the post has tilted a few degrees out of plumb. We dispatch technicians to every Hollywood neighborhood, and a live person answers at (928) 260-0864 to schedule you, any hour.
Why Vance Gate Repair Is Hollywood’s Preferred Gate Repair Company
Hollywood homeowners hear a lot of gate-repair quotes that sound like guesswork. Ours come as a written price before anything gets touched. That’s not a sales posture. It’s how we’ve operated since 2014, when Adrian Vance carried the documentation habit over from commercial access-control work: a written scope, a written price, and a photo record on every visit. Under Haven Standard Clause 1, you get the flat price in writing before any work starts, so the invoice at the end matches the number you approved at the start.
Our technicians know Hollywood’s specific gate stock. They know the Spanish Colonial Revival pedestal hinges that rust through from inside the barrel. They know the mid-century aluminum slide gates on Beachwood Canyon driveways where the rack and pinion has worn unevenly because the post has settled. They carry digital levels on every hillside call and treat post re-plumbing as a standard line item, not an upsell. A background-checked, uniformed technician arrives with a name and photo sent before dispatch, and leaves you with a documented record of what was found, what was adjusted, and what was replaced. That’s Clause 4.
Our Gate Repair Services in Hollywood
Electric Gate Repair
Most electric gate failures in Hollywood trace to the operator, not the gate itself. Intense UV exposure breaks down neoprene motor seals faster than you’d expect from the mild weather, and Santa Ana wind events stress cantilevered swing arms enough to strip operator gears. We service LiftMaster, DoorKing, BFT, Ghost Controls, Elite, and Mighty Mule operators, so the motor already on your property gets repaired rather than replaced whenever that’s the better answer. A typical operator repair in Hollywood runs $185-$395, including the service call, diagnosis, and most common parts like limit switches, capacitors, and control boards.
Automatic Gate Repair
Automatic gates in Hollywood flats are often older systems installed during the entertainment-industry security buildout of the 1990s and 2000s. Many of those original control boards are now obsolete, and the practical question is whether to retrofit the existing mechanicals with a modern board or replace the operator entirely. We’ll tell you honestly which is cheaper over the long run. A retrofit that keeps your existing gate and replaces only the automation runs $650-$1,400 in Hollywood, depending on whether we’re integrating with an existing video intercom and access-control system.
Hinge & Post Repair
This is the most Hollywood-specific service we offer. Hillside soil creep and minor seismic settling constantly tip gate posts even a few degrees off vertical. On a swing gate, that’s enough for the gate to drift open under gravity. On a slide gate, it binds the rollers and wears the rack unevenly. We re-plumb posts on poured-concrete columns, rebuild hinge pockets, and weld replacement hinge barrels onto original 1920s-1940s wrought iron where the material is sound. Hinge and post repair in Hollywood typically runs $220-$575 depending on whether we’re resetting one post or rebuilding both hinge points.
Gate Realignment
Most “broken” gates in the Hollywood Hills are actually just out of alignment. A slide gate that shudders halfway down the track, a swing gate that scrapes the driveway at the latch end, a dual-leaf gate that no longer closes flush at center. We realign tracks, reset the rack and pinion, re-level the gate leaves, and adjust the operator’s limit switches so the gate stops where it’s supposed to. Realignment work in Hollywood generally runs $165-$380. If you heard a grinding noise before the gate stopped moving, tell the dispatcher that when you call (928) 260-0864, and we’ll have the right shims and the digital level on the truck.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Hollywood
One thing that sets us apart in Hollywood is that we repair whatever motor is already on your property instead of steering you toward a replacement. Our techs carry parts and diagnostic tools for nine automation brands, including DoorKing, Elite, and Ghost Controls operators that are common across Hollywood flats and hillside homes alike. We stock common boards, remotes, safety photocells, and limit switches on the truck, which means most same-visit repairs don’t require a second trip. If your operator is obsolete and the board is no longer manufactured, we’ll say so plainly and give you a written retrofit option next to a replacement option with real numbers for both.
Common Gate Repair Problems We See in Hollywood Homes
- Slide gate binding from post tilt: Hillside soil creep and minor seismic settling tip posts a few degrees off vertical, which binds rollers and causes the operator to strain and trip its overload. We carry a digital level on every hillside call and quote post re-plumbing as a standard line item.
- UV-weathered motor seals and track wipers: The dry Mediterranean climate means no freeze-thaw, but relentless sun breaks down neoprene seals, powder coat, and rubber wipers years before the motor itself wears out. A failed seal lets dust and moisture into the gearbox, and the first sign is a louder-than-normal operator.
- Santa Ana debris in slide-gate tracks: Wind funneling through Laurel, Cahuenga, and Beachwood Canyon corridors deposits palm fronds, gravel, and construction debris into tracks. Debris that sits unpushed through one wind event gets ground into the rollers and bends the track wiper, which starts a cascade of mechanical wear.
- Drifting swing gates on steep driveways: On grades above 10-15%, a swing gate that isn’t perfectly plumb drifts open the moment the operator releases it. Gravity does the work. This is almost always a post or hinge problem, not an operator problem, and it’s the single most common misdiagnosis we fix from other Hollywood gate-repair companies’ estimates.
Pricing for Gate Repair in Hollywood, CA
Here’s what Hollywood gate repair actually costs, in writing, the way we’d hand it to you before starting. A service call with diagnosis runs $85, credited toward the repair if you proceed. Electric operator repair runs $185-$395. Hinge and post repair runs $220-$575, depending on whether we’re resetting one post or rebuilding both hinge barrels with welding. Gate realignment runs $165-$380. Full automation retrofit on your existing gate runs $650-$1,400. Slide-gate track replacement on a hillside driveway runs $480-$950. The price you approve is the price on the invoice. No discoveries that double the bill. We hand you the written scope before any work begins, per Haven Standard Clause 1, and we’ll also give you a free second opinion on any other company’s written estimate, no charge.
We Also Serve Cities Near Hollywood
Our Gate Repair crews dispatch from the Los Angeles metro office to Hollywood neighborhoods daily. If you manage properties near the city line, we also cover Los Angeles, San Jose, San Francisco, and Fresno through the same 24/7 live-answer scheduling line. Every job gets the same written-price standard regardless of which city it’s in. For Gate Repair in Hollywood specifically, we keep the canyon and flatland access routes in mind when we schedule, though we don’t charge differently by neighborhood.
Serving Hollywood, CA - Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Hollywood
A post that’s out of plumb shows up as uneven wear on the rollers, a gate that shudders or hesitates at the same spot every time, and an operator that trips its overload more often in warm weather. You can also look at the gap between the gate and the post; if it’s visibly wider at the top than the bottom, the post is leaning. We confirm with a digital level on every hillside call in Hollywood and quote post re-plumbing at $185-$320 per post, not as a surprise add-on. Call (928) 260-0864 and we’ll check it during the service call, with the diagnosis credited toward the repair if you proceed.
Usually, yes, provided the gate itself is structurally sound and the posts are plumb. The typical Hollywood job involves mounting a gear-driven arm or underground operator, adding a keypad or intercom, and wiring entrapment protection. We’ll weld reinforcement plates to the original iron where the operator attaches, and match the hardware finish as closely as the original patina allows. Retrofit pricing starts around $1,100, depending on the operator brand and whether we’re tying into an existing access-control system.
Almost always. On a steep grade, any post tilt at all becomes a downhill force on the gate, and the operator can’t hold it against gravity once the limit switch is satisfied. The fix is re-plumbing the offending post and reinstalling the hinges level, which in Hollywood runs $220-$575, plus any hinge weld repair. The operator itself usually doesn’t need replacing. Get a written diagnosis before anyone starts cutting or welding.
The biggest protective step is keeping the track clear, because debris that sits gets ground into the rollers and bends the track wiper. We also install track-clear screens and heavier-gauge wipers on exposed canyon-facing gates in Beachwood and Laurel Canyon corridors, where wind-loading is worst. And if the gate has been stressed by repeated wind-driven debris impacts, we’ll inspect the operator gear and the rack for uneven wear before they fail. A seasonal track service in Hollywood runs $140-$220 and is cheaper than replacing a track or an operator.
Yes. Under both California law and UL 325, every automatic gate in Hollywood must have functioning entrapment protection devices, typically monitored photo-eyes on vehicular gates and contact sensors on pedestrian gates. We test the photo-eyes, the reversing sensitivity, and the force settings on every automatic gate repair, and photograph the test result for your record. If a gate older than roughly 2010 lacks proper entrapment protection, we’ll write you a retrofit quote with the exact part numbers, because a gate that can’t reverse on contact is a liability as much as a mechanical problem.
Need a gate fixed in Hollywood? Call (928) 260-0864 for a free estimate with a written price before any work starts. A live person answers, 24 hours a day.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Hollywood since 2014.