Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Cedar Park
Gate repair in Cedar Park usually costs between $185 and $420 for a typical hinge, post, or alignment fix, and most jobs are completed the same visit. If your gate is dragging, leaning, or the opener keeps reversing, the cause in this city is usually not the hardware you can see. It’s the clay under the post. Vance Gate Repair has worked on thousands of Cedar Park gates since 2014, and we’ll give you a written price before any work starts. Call (928) 260-0864 and a live person answers, any hour.
Key Takeaways
- Cedar Park’s expansive black clay heaves gate posts 1-3 inches out of plumb every season; most “hinge” problems are actually footing failures.
- Typical repairs run $185-$420; full post resets with concrete run $600-$1,200 depending on depth and access.
- HOA communities like Twin Creeks and Buttercup Creek often require architectural-committee approval before gate work begins.
- Vance Gate Repair writes the price down before anyone picks up a tool, and photographs every adjustment before leaving.
- We service nine automation brands including LiftMaster, FAAC, BFT, DoorKing, Viking, Elite, Mighty Mule, Linear, and Ghost Controls.
Why Vance Gate Repair Is Cedar Park’s Preferred Gate Repair Company
We’re the Gate Repair crew Cedar Park homeowners call when they’ve already replaced the hinges once and the gate still drags. The reason is built into the soil. Williamson County black clay expands and contracts with every rain and every 100°F summer week, and it does not move evenly. A post set in a shallow builder-grade footing will lean, twist, or heave over a few seasons, and no amount of hinge shimming fixes that. We know this because we document it: before we leave, you get a photo log of what we found, what we set, and what we installed, every single time.
Our technicians are background-checked and uniformed, and you’ll know who’s coming before they arrive. We work on gates in Twin Creeks, Buttercup Creek, Forest Oaks, Ranch at Cypress Creek, and every subdivision in between. We keep parts for the major brands on the truck, so most repairs in Cedar Park don’t wait on a second visit. And under our 365-Day Done Right Promise, if the repair isn’t right, we make it right. No argument, no fee.
BeforeAfterOur Gate Repair Services in Cedar Park
Hinge & Post Repair
This is the repair Cedar Park homes need most, and it’s the one most often misdiagnosed. A gate that sags or drags after a hinge replacement usually means the post has moved, not the hardware. We excavate the footing, set a deeper pier with rebar where the soil demands it, and re-hang the gate so the latch and opener actually line up again. Under Clause 4 of our Haven Standard (Evidence on every job), you get a photographic record of the new post depth and the gate in final alignment.
Gate Realignment
In Cedar Park’s clay, realignment is rarely a two-minute hinge adjustment. It means checking the post for heave, measuring the gap at the latch, and correcting the swing or slide path so the gate doesn’t bind or scrape. We see this constantly on the 15-to-20-year-old iron ornamental gates that went up during Cedar Park’s big construction wave. The gate itself is usually fine. The ground it was built on is not.
Electric Gate Repair
When an automatic gate opener keeps reversing, beeping, or refuses to close in Cedar Park, the first thing we check is whether the photocell beam can actually see across the gate path. A post that heaved two inches out of plumb breaks that beam alignment every time. We also work on limit switches, control boards, capacitor failures, and loop detectors. We service LiftMaster, FAAC, BFT, DoorKing, Elite, Mighty Mule, Viking, Linear, and Ghost Controls, so we fix the opener that’s already on your gate, not the one we’d rather sell you.
Lock Repair
Cedar Park gates with keyed locks, maglocks, or solenoid releases fail in predictable ways: the strike plate no longer aligns after post movement, or the lock’s internal springs wear out in the heat. We repair mechanical and electric locks on pedestrian and vehicle gates, and we leave you the part number and a photo of the repaired assembly before we leave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cedar Park
We work on nine major automation brands, which matters in Cedar Park because so many builders installed different openers across different subdivisions. Your neighbor in Buttercup Creek might have a Ghost Controls opener while your Twin Creeks home runs a DoorKing. We carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule on the truck, so the repair doesn’t stall waiting on a shipped part. No brand steering, no “you should just replace it.” If the operator can be repaired, we repair it and write down exactly what we replaced.
Common Gate Repair Problems We See in Cedar Park Homes
- Post heave from black clay: Williamson County’s expansive soil pushes gate posts 1-3 inches out of plumb every year. The gate starts dragging on the latch side or binding on the track, and the fix is a footing reset, not another hinge swap.
- Opener strain from misaligned gates: When a swing gate sags, the opener’s photocell beam misses its receiver, so the gate reverses or beeps. We realign the post first, then retune the opener, which stops the strain instead of just silencing the alarm.
- Slide gate binding on track: A slide gate that sticks halfway and grinds often means the rack and pinion teeth are not meshing because the post shifted. We reset the post, clean and re-grease the rack, and adjust the pinion clearance so the gate travels without resistance.
- HOA approval delays: In master-planned communities like Twin Creeks and Forest Oaks, architectural-committee approval is often required before visible gate work. We help homeowners navigate that process, and we keep the written quote and material spec ready so the committee sees exactly what’s being changed.
Pricing for Gate Repair in Cedar Park, TX
Here are honest price ranges for the work we do in Cedar Park. A hinge replacement with post inspection runs $185-$320. A gate realignment on a swing gate, including latch and stop adjustment, runs $225-$380. A post reset requiring a new concrete pier with rebar runs $600-$1,200 depending on depth, access, and whether the post is steel or cedar. Electric opener repairs run $160-$450 based on the failed part: a photocell is at the low end, a control board at the high end. Every job is quoted in writing before we start. The price on the paper is the price on the invoice, and it’s handed over before any tool comes off the truck. Free second opinion on any written estimate from another company in Cedar Park, bring the paperwork and we’ll review it at no cost.
We Also Serve Cities Near Cedar Park
Our crews cover Gate Repair in Cedar Park and the neighboring communities of Leander, Round Rock, Pflugerville, and Georgetown. If you’re in one of those cities and your gate is dragging, leaning, or the opener won’t cooperate, the same written pricing and documented photo record apply. Call (928) 260-0864 and we’ll put a name and an arrival window on it.
Serving Cedar Park, TX - Our Local Coverage Area
We’re based in the Cedar Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Cedar Park
The hinges are rarely the actual problem. Cedar Park sits on Williamson County’s expansive black clay, which heaves posts 1-3 inches out of plumb every season. Replacing the hinge without resetting the post footing means the new hinge starts its life already misaligned, and the sag returns within months. In Twin Creeks and Buttercup Creek, where builder-grade footings were often shallow, this is the single most common root cause we document. The fix is a post reset with a deeper pier, then re-hanging the gate. Call (928) 260-0864 for a written price before any work starts - estimates are free.
Usually yes, if the repair changes the visible appearance of the gate or fence line. Twin Creeks CC&Rs restrict material, color, and style, and an architectural-committee review is often required before installation work begins. We prepare a written scope with materials and a photo record so the committee sees exactly what’s changing, and repair work that restores the original appearance often clears faster than a redesign.
Yes. In Cedar Park, the most common cause is a misaligned photocell or safety edge that stops reading correctly after the post heaves or the gate sags. We reset the post and re-tune the opener as one job, because fixing the opener without fixing the geometry just moves the problem down the line. We service LiftMaster, FAAC, BFT, DoorKing, Elite, Mighty Mule, Linear, Viking, and Ghost Controls openers in Cedar Park daily.
It’s usually the rack and pinion no longer meshing because the post shifted and the track is binding. The grinding sound is the pinion teeth fighting the rack as the gate moves through the stuck spot. We reset the post, correct the track alignment, and re-set the rack-to-pinion clearance. The written record you get includes the part numbers and the new measurements, so a future technician never has to rediscover what we found.
We excavate around the existing post, remove it, and set a new concrete pier deeper than the original, often with rebar for lateral strength in the clay. Then we re-hang the gate, realign the opener, and photograph the new post depth before backfilling. In Buttercup Creek specifically, the original footings are often only 24-30 inches deep, which is not enough for the soil movement we see. A proper reset gets you a gate that stays true through the next summer-and-rain cycle. Call (928) 260-0864 and we’ll give you a written price for the reset - free estimate, no obligation.
Call Vance Gate Repair in Cedar Park
If your gate is dragging, leaning, grinding, or the opener won’t cooperate, call us at (928) 260-0864. A live person answers, day or night. We’ll schedule a Cedar Park visit, diagnose the problem with photos, and hand you a written price before any work begins. The 365-Day Done Right Promise covers every repair we complete, and the documented photo record means you’ll see exactly what we found and what we fixed.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Cedar Park since 2014.