Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Boulder, CO
Gate motor and opener repair in Boulder usually runs between $240 and $780, and in many cases we can have a technician at your property the same day you call. The work here is shaped by Chinook wind events that rack gates out of square and a housing stock that skews toward heavier, automated driveway gates on foothills and long private drives. If your gate won’t open, drifts after closing, or sounds like it’s grinding metal, call us at (928) 260-0864 and we’ll give you a written price before any work begins.
Why Boulder Homes Are Different
Boulder sits at the point where downslope Chinook winds funnel off the Front Range through the Flatirons corridor, and those gusts regularly exceed 100 mph. That’s not a weather footnote here; it’s the reason so many gate repairs in Boulder involve sheared hinges, frames pulled out of square, and operators that were overwhelmed in a single afternoon. The call surge after a major wind event is something every Boulder gate company knows, and it’s the reason we stock heavier-gauge hinge bolts and wind-rated brackets on our trucks here specifically.
The housing stock compounds it. University Hill and Mapleton Hill bring late-Victorian and Craftsman gates with ornamental iron that’s often 60 to 100 years old. Martin Acres and the mid-century ranch belt have lighter steel gates whose powder coating now sits under high-UV sun at 5,430 feet, breaking down faster than it would in Denver. And the foothills properties along Flagstaff Road and the western edges of Chautauqua and Four Mile Creek face their gates directly into the downslope wind path. On any west-facing gate in those zones, standard residential hardware fails after the first major Chinook. We spec wind-rated operators and heavier-gauge hinge bolts on those jobs because we’ve seen what the alternative looks like.
Our Main Boulder Services
Most Boulder homeowners call us about one of two problems: a gate that’s broken or binding and needs repair, or a property that needs a new gate designed and installed from the footing up.
Gate Repair in Boulder
Repair work in Boulder tends to run heavier than in other Front Range cities because the wind damage is real and the gates themselves are often older, heavier, or ornamental. We see bent hinge pins on wrought-iron gates around Mapleton Hill, racked slide frames on sloped drives in the foothills, and operator limits knocked out of calibration after a Chinook throws the gate past its travel. The job is to identify exactly what moved, sheared, or seized, then fix that and only that. See the full scope at Gate Repair in Boulder.
Gate Installation in Boulder
New gate installation in Boulder has to account for the wind load before anything is bolted down. A west-facing gate along Flagstaff Road without wind-rated brackets and heavier posts won’t last through its first winter. We also work around Boulder’s specific mix of historic districts and HOA-governed foothills communities, which means material choices and post depth get spec’d to the site, not pulled from a template. The full installation process from footer to final calibration is covered at Gate Installation in Boulder.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Boulder
Gate motor and opener work in Boulder is the service we dispatch most after wind events, because a Chinook can push a gate past its set travel in seconds and burn out a motor that was working that morning. The older ranch homes in Martin Acres often have original operators that were never sized for the gates they’re driving, and foothills properties with long driveways need motors that hold up to real wind load. This is the core of what we do; the full scope of motor repair, replacement, and integration lives on our Gate Motor & Opener hub.
Motor Installation
Signs you need it
The existing motor is 10-plus years old, doesn’t respond consistently, or was sized for a lighter gate than what’s hanging on your posts.
What it costs in Boulder
Motor installation in Boulder typically runs $780 to $1,460, depending on the operator brand and whether new brackets need to be fabricated for a wind-exposed site.
How we do it
We pull the old operator, check the post for movement, install the new motor with wind-rated brackets where the site calls for it, and recalibrate limits and force settings from scratch.
Motor Repair
Signs you need it
The gate opens but stalls mid-travel, the motor hums without moving the leaf at all, or you smell ozone or burnt insulation after a wind event.
What it costs in Boulder
Motor repair in Boulder runs $240 to $540 for most jobs: capacitor swaps, limit-switch recalibration, gear replacement, or control-board trouble on a single operator.
How we do it
We bench-test the motor’s draw, inspect the limit switch and gear teeth, replace the failed component rather than the whole unit, and photograph the final state before we leave.
What Gate Motor & Opener Costs in Boulder
| Item | Typical range in Boulder |
|---|---|
| Motor diagnostic and tune-up | $140 - $245 |
| Motor repair (capacitor, limit switch, gear) | $240 - $540 |
| Motor installation (new operator) | $780 - $1,460 |
Can you fix a gate motor the same day in Boulder?
Yes, in most cases. Calls that come in before noon are typically dispatched the same day, and we carry common capacitors, limit switches, and control boards for LiftMaster, FAAC, BFT, and Linear motors on our Boulder trucks. Call (928) 260-0864 and we’ll give you a written price before the tech leaves our office.
Does high wind actually destroy gate motors in Boulder?
It does. A 100 mph Chinook gust can push a gate leaf past its set travel, strip gears, and burn out a motor in one afternoon. We spec wind-rated operators on west-facing gates along Flagstaff Road and similar exposure zones for exactly this reason.
Gate Access Control in Boulder
Access control in Boulder often means retrofitting keypads, intercoms, or phone-entry onto gates that were mechanical for decades, and the cold snaps here make outdoor electronics work harder than they should. UV at 5,430 feet also fades keypad faces and degrades rubber seals on entry panels faster than lower-elevation cities, so component choice and sealing matter. We install and service all of it, and the full scope is on our Gate Access Control hub.
Keypad Entry
Signs you need it
Kids, tenants, or landscapers are climbing over or propping the gate open because there’s no way to enter a code.
What it costs in Boulder
Keypad entry installation in Boulder runs $340 to $820 per keypad, depending on whether it’s a standalone unit or tied into an existing operator’s control board.
How we do it
We mount and seal the keypad, wire it to the operator’s open input, program codes, and hand you a written record of the settings and the photo log of the wiring.
Video Intercom
Signs you need it
You’re walking to the gate to see who’s there because the current intercom is dead, feedback-looped, or nonexistent.
What it costs in Boulder
Video intercom systems in Boulder start at $1,100 and run to $2,400 depending on monitor size, camera resolution, and whether we’re pulling new low-voltage wire through existing conduit.
How we do it
We pull the old intercom, install the camera and indoor monitor, wire through existing or new conduit, and provide a one-page diagram of the wiring path so future service doesn’t require tracing blind.
What Gate Access Control Costs in Boulder
| Item | Typical range in Boulder |
|---|---|
| Keypad entry (standalone) | $340 - $620 |
| Phone entry / cellular intercom | $780 - $1,480 |
| Video intercom | $1,100 - $2,400 |
Does a Boulder keypad need to be weather-sealed differently?
Yes. At 5,430 feet with intense UV and freeze-thaw cycles, unsealed keypads fail within two to three years. We silicone the edges, use weather-rated enclosures, and leave the seal photo-recorded on every install.
Can you tie my gate intercom to my phone?
Yes. Phone-entry and cellular intercom systems let you answer the gate from your cell and open it remotely. We program the unit, test it through your carrier’s signal, and leave the access codes in writing. Call (928) 260-0864 for a written price.
Gate Parts & Welding in Boulder
Parts and welding work in Boulder is often the difference between a $300 hinge replacement and a $2,400 full-frame replacement, and the wind damage here makes it more common than in calmer Front Range cities. When a Chinook shears a hinge or racks a frame out of square, the fix is almost always a targeted weld or a post reset, not a new gate. The full breakdown of what we fabricate and repair is on our Gate Parts & Welding hub.
Hinge Replacement
Signs you need it
The gate sag at the latch side has gotten worse over the season and the leaf scrapes concrete or fails to close without lifting.
What it costs in Boulder
Hinge replacement in Boulder typically runs $180 to $420 per hinge, with the actual number depending on whether the post is solid enough to re-thread or needs reinforcement first.
How we do it
We support the gate leaf, cut or unbolt the old hinge, weld or bolt the new one in place, and photograph the final alignment so you have a record of what was changed.
Post Replacement
Signs you need it
The post leans visibly, the gate won’t latch because the top and bottom no longer align, or freeze-thaw heaving has moved the footing enough to bind the hinges.
What it costs in Boulder
Post replacement in Boulder runs $480 to $1,400 depending on whether we’re setting a new steel post in concrete or reinforcing the existing one with a weld-on sleeve.
How we do it
We dig or cut the old post, set the new one in concrete at the correct depth for Boulder’s freeze line, plumb and brace it, and photograph the footing before backfill.
What Gate Parts & Welding Costs in Boulder
| Item | Typical range in Boulder |
|---|---|
| Hinge replacement (per hinge) | $180 - $420 |
| Post replacement (steel, set in concrete) | $480 - $1,400 |
| On-site welding (per hour plus materials) | $120 - $210 |
Can you weld a gate without taking it off the property?
Usually, yes. On-site welding covers most hinge, bracket, and cracked-frame repairs. We bring a mobile rig, shield the surrounding area, and leave a photo record of the welds before we load out.
How long does a welded repair last on a Boulder gate?
A properly welded hinge or gusset on a steel gate lasts as long as the surrounding metal. We grind the area clean, weld with the correct rod for the material, and photograph the result so any future technician knows exactly what was done.
Brands We Service in Boulder
We work on Ghost Controls, DoorKing, Elite, and Mighty Mule motors already installed on Boulder properties, along with five other major automation brands. Common parts like control boards, capacitors, and limit switches are stocked on our trucks here, so most motor repairs don’t wait for a parts order. See the full list at our brands.
Pricing for Gate Repair in Boulder, CO
| Service | Typical range in Boulder |
|---|---|
| Gate service call and diagnostic | $120 - $220 |
| Motor repair | $240 - $540 |
| Motor installation | $780 - $1,460 |
| Keypad entry | $340 - $820 |
| Phone entry / cellular intercom | $780 - $1,480 |
| Video intercom | $1,100 - $2,400 |
| Hinge replacement (per hinge) | $180 - $420 |
| Post replacement | $480 - $1,400 |
| On-site welding (per hour) | $120 - $210 |
Prices in Boulder run higher than the Front Range average when the job involves wind-exposed sites that need heavier brackets, foothills drives that require a longer power run, or ornamental gates that date back to the Victorian and Craftsman era and need care during disassembly. Every price is written and handed to you before any work starts, so there’s no invoice surprise at the end.
Neighborhoods We Serve in Boulder
We dispatch technicians across Boulder daily, from the historic streets of Mapleton Hill to the foothills communities along Flagstaff Road and Four Mile Creek. Response time is typically same-day for calls before noon, and next-morning for after-hours requests.
- Mapleton Hill
- University Hill
- Martin Acres
- Chautauqua
- Four Mile Creek
Service Area - Cities Near Boulder
Our Boulder crews also cover the communities along the US-36 corridor and the surrounding county. If your gate is in Louisville, CO, Lafayette, CA, Erie, CO, or Broomfield, CO, the same written-price policy and same documented service record apply.
Serving Boulder, CO - Our Local Coverage Area
We’re based in the Boulder area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Boulder
Most Boulder calls before noon get a same-day dispatch. After-hours calls are answered live around the clock, and a technician is typically on site the next morning. Torn-off hinges or a gate that won’t close takes priority over non-urgent work.
In most residential cases, no permit is required for a like-for-like gate replacement or motor swap. If your property is in a historic district or a foothills HOA, design review may apply, and we’ll flag that before quoting so you’re not surprised.
Yes, and we do every week. We service all nine major automation brands and any gate structure. We’ll document the system as we find it, work with what’s there, and give you a written price before touching the repair. Call (928) 260-0864 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Boulder Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.