Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Inglewood, CA
Gate motor and opener failures in Inglewood most often come down to two things: 30-to-40-year-old iron gates that have outlived their original hardware, and salt-laden coastal air that corrodes control boards, hinges, and latch mechanisms faster than you’d expect five miles from Santa Monica Bay. Most jobs we see are swing-gate motors on 1980s-era ornamental iron that simply stopped responding, or slide-gate operators on multi-unit apartment buildings serving 8 to 20 units where a failure means tenants can’t get in. We work on the motor that’s already on your property, we write the price before any work starts, and we leave you a photo record of everything we found, adjusted, or replaced. Call (928) 260-0864 and a live person answers.
Why Inglewood Homes Are Different
Inglewood’s gate stock is a product of two eras. The first wave came during the 1980s and 1990s, when homeowners and landlords retrofitted ornamental wrought-iron and chain-link driveway gates onto post-WWII bungalows and 1960s-70s apartment complexes as a crime-prevention measure. Those gates are now 30 to 40 years old, and the structural fatigue shows: sagging hinges, rusted posts, wheels that no longer track, and motors that strain against frames that have shifted out of square. The second wave is happening right now, driven by the SoFi Stadium and Hollywood Park development. Property owners along the stadium corridor are modernizing gates on renovated rentals, adding automatic operators, keypads, and intercoms to properties that sat untouched for decades.
What makes Inglewood technically distinct from neighboring Hawthorne or Gardena is the coastal marine layer. Salt-laden humidity works into iron frames, hinge barrels, and latch hardware at an accelerated rate. Powder coat and paint failures within 10 to 12 years are typical without regular maintenance, and moisture intrusion into motor housings and control boards is a chronic failure mode here. Gates don’t freeze in Inglewood, but they do corrode, and a control board that’s been breathing salt air for a decade will fail in ways that look electrical but are really environmental. We see it constantly: a motor that tests fine on the bench but trips the breaker on-site because the housing seal failed two years ago and nobody noticed.
There’s also a permitting reality in the blocks immediately surrounding SoFi Stadium and the Hollywood Park campus. Inglewood’s building department has become more active in reviewing unpermitted gate modifications as the city manages large pedestrian crowds on event days. Gates that open outward toward a public sidewalk in that corridor face setback and swing-clearance enforcement that’s stricter than in surrounding cities. If your gate swings toward the street and you’re within a few blocks of the stadium, that affects what we can repair in place versus what needs to be reconfigured to meet current code.
Our Main Inglewood Services
Two services dominate our work in Inglewood: repairing the aging gates that are already on the property, and installing new gates where renovation or reconfiguration has made repair the wrong call. Each has its own page with full detail.
Gate Repair in Inglewood
Most Inglewood gate repairs we handle are structural: hinge barrels worn oval by 30 years of salt air, posts rusted at the base, wheels that have chewed through their own track. The work starts with identifying what moved out of alignment and what simply wore out, then pricing the repair in writing before anything gets unbolted. On multi-unit buildings near the stadium corridor, we often see slide-gate operators that haven’t been serviced in years and are now failing under daily cycle counts they were never engineered for. Gate Repair in Inglewood covers the full breakdown of what we fix and what it costs.
Gate Installation in Inglewood
New installations in Inglewood fall into two camps: replacing a gate that’s structurally beyond saving, and adding automation to a property that’s being renovated. The stadium-driven renovation wave means we’re frequently installing automatic operators, keypads, and intercom systems on properties where the old gate was purely manual. Inglewood’s housing density also means installers have to work with tighter setbacks and shared property lines than in single-family neighborhoods elsewhere. Gate Installation in Inglewood explains the full process, including what’s required around sidewalk clearances near SoFi Stadium.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Inglewood
Gate motor and opener failures in Inglewood follow a pattern we know well: a 1980s or 1990s gate that was retrofitted onto a post-war bungalow or apartment complex, now running a motor that’s been dealing with salt air and daily use for longer than it was designed to. The marine layer five miles from Santa Monica Bay doesn’t freeze anything, but it does push moisture into motor housings and control boards, and that’s the failure we see most: a motor that tests fine but trips on-site because the internal seal gave out. We service all nine major automation brands, so we work on whatever motor is already on your property rather than steering you toward a replacement. Gate Motor & Opener covers the full range of what we do.
Motor Installation
Signs you need it
The motor hums but the gate doesn’t move, or the breaker trips every time the gate cycles, or the motor is 15-plus years old and repair parts are no longer economical to source.
What it costs in Inglewood
Motor replacement on an Inglewood swing gate typically runs $550 to $1,250 for the motor and labor, depending on brand and whether the arm bracket is intact.
How we do it
We pull the old motor, check the mounting plate and arm bracket for corrosion, install the new motor, set the limit switches, and photograph the new positions for your record.
Motor Repair
Signs you need it
The gate opens halfway and reverses, or makes a grinding sound on one part of the cycle, or the motor runs but the gate doesn’t move at all.
What it costs in Inglewood
Most motor repairs in Inglewood fall between $180 and $340, including limit-switch resets, capacitor replacements, and control-board troubleshooting.
How we do it
We test the motor under load, identify whether the failure is mechanical or electrical, replace only the failed component if repair is viable, and give you a written price before any work starts.
Linear Motor
Signs you need it
Your existing linear-arm operator has stopped responding, or the arm extends but won’t retract on command, or the motor cycles but the gate doesn’t move.
What it costs in Inglewood
Linear motor service in Inglewood ranges from $180 for diagnostics and small repairs up to $850 for a full linear-arm replacement.
How we do it
We bench-test the linear arm, check for moisture intrusion in the housing (a chronic Inglewood problem), and replace the arm or internals based on what we find, with photos of every step.
Slide Motor
Signs you need it
Your slide gate has stopped cycling for the 8 to 20 units that depend on it, or the motor runs but the chain or belt no longer engages, or the gate moves in jerks.
What it costs in Inglewood
Slide motor repair or replacement on Inglewood apartment gates typically runs $450 to $1,200, depending on the operator’s duty rating and how much of the chain or belt needs work.
How we do it
We inspect the track, chain or belt, and drive sprocket together, because a slide-gate motor failure is often caused by a misaligned track that overloaded the motor.
What Gate Motor & Opener Costs in Inglewood
| Item | Typical range in Inglewood |
|---|---|
| Motor replacement (swing or slide) | $550 - $1,250 |
| Motor repair (limit switch, capacitor, board) | $180 - $340 |
| Full automation package (motor, arms, safety) | $1,100 - $1,950 |
Can you come the same day for a motor failure in Inglewood?
Yes. A live person answers 24/7, and for motor failures we schedule same-day dispatch whenever a technician is available in the Inglewood area. Call (928) 260-0864 to confirm.
Do you work on the motor already on my gate, or do I have to replace it?
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We repair what’s repairable and only recommend replacement when repair costs exceed replacement value. Call (928) 260-0864 for a written quote.
Gate Access Control in Inglewood
Access control in Inglewood sits at the intersection of two market pressures: aging apartment buildings built in the 1960s and 70s that still rely on nothing but a key or a buzzer, and newly renovated properties near SoFi Stadium that need modern entry systems to manage tenants, guests, and event-day traffic. The salt air that corrodes gate frames also works on keypad contacts and card reader housings, which means entry systems here fail on their weather-facing components first. We install and repair keypads, remotes, phone entry, card readers, and video intercoms. Gate Access Control spells out everything we cover.
Keypad Entry
Signs you need it
The keypad doesn’t respond to code entry, or some buttons work but others don’t, or the housing shows visible corrosion from years of salt-laden air.
What it costs in Inglewood
Keypad installation in Inglewood typically runs $250 to $450 for residential units, and $450 to $700 for multi-unit apartment systems.
How we do it
We wire the keypad to the gate operator, program the codes, set the relay configuration, and photograph the wiring for your record.
Video Intercom
Signs you need it
Your existing intercom audio works but you need visual confirmation of who’s at the gate, or the intercom died entirely and you’re still relying on a 1990s buzzer system.
What it costs in Inglewood
Video intercom installation for an Inglewood apartment gate runs $800 to $1,200 for a single entry point, including wiring and programming.
How we do it
We mount the camera unit at the gate, run the signal to your phone or in-unit monitor, and test the full path before we leave, with photos of the install.
Phone Entry
Signs you need it
You want visitors to call your cell phone from the gate instead of buzzing a fixed line, or the existing phone entry system has stopped dialing out.
What it costs in Inglewood
Phone entry installation typically runs $450 to $800 for residential driveway gates in Inglewood, and more for multi-unit systems with multiple numbers programmed.
How we do it
We install the GSM or landline unit at the gate, program the dial-out numbers, and test the call path through to your phone before leaving.
What Gate Access Control Costs in Inglewood
| Item | Typical range in Inglewood |
|---|---|
| Keypad installation (residential) | $250 - $450 |
| Video intercom (single entry) | $800 - $1,200 |
| Phone entry installation | $450 - $800 |
Can you integrate a new keypad with an older BFT or Linear motor?
Yes. We service BFT, Linear, Viking, and Ghost Controls, among others, and we wire new keypads and intercoms into whatever motor is already on the gate. Call (928) 260-0864 for a written estimate.
What causes Inglewood keypads to fail?
Salt-laden humidity from the marine layer corrodes the contact pads inside the keypad housing. It starts as intermittent button response, then progresses to total failure. We replace the unit when corrosion has reached the board. Call (928) 260-0864 to schedule.
Gate Parts & Welding in Inglewood
Structural gate work in Inglewood is defined by the city’s climate history: 30-to-40-year-old ornamental iron gates that have spent decades in salt air, with hinge barrels worn oval, posts rusted at ground level, and welds that have finally let go. The coastal humidity five miles from Santa Monica Bay means rust works from the inside of a tube before it shows on the outside, which is why we see posts that look fine from the driveway but are paper-thin at the base. We replace hinges, posts, rails, and rollers, and we do custom welding on-site. Gate Parts & Welding covers the full scope.
Hinge Replacement
Signs you need it
The gate sags toward the latch side, or scrapes the ground on the swing, or the hinge barrel shows visible rust scaling and the gate no longer sits level.
What it costs in Inglewood
Hinge replacement on an Inglewood ornamental iron gate typically runs $180 to $400 per hinge set, including welding and painting the new hardware.
How we do it
We support the gate, cut or unbolt the old hinges, weld in the new set, and photograph the final alignment before closing up.
Post Replacement
Signs you need it
The gate post is rusted through at the base, or leaning, or the gate pulls the post when it cycles and the concrete footing is cracked.
What it costs in Inglewood
Post replacement in Inglewood runs $400 to $900, including cutting out the old post, setting the new one in concrete, and re-hanging the gate.
How we do it
We brace the gate, cut the old post below grade, set a new post in fresh concrete, and re-hang the gate with correct swing clearance, especially near sidewalk setbacks.
Rail Repair
Signs you need it
The bottom rail has rusted through in one or more places, or the gate frame flexes when it cycles, or the rail has bent from years of the gate dragging on the ground.
What it costs in Inglewood
Rail repair on Inglewood driveway gates typically runs $300 to $750, depending on the length of rusted rail and whether the frame needs reinforcing.
How we do it
We cut out the rusted section, weld in replacement steel, grind the joints smooth, and paint the repair to match the existing finish.
What Gate Parts & Welding Costs in Inglewood
| Item | Typical range in Inglewood |
|---|---|
| Hinge replacement (per set) | $180 - $400 |
| Post replacement | $400 - $900 |
| Rail repair | $300 - $750 |
Do you weld on-site in Inglewood, or do you take the gate away?
We weld on-site in almost every case. Removing a gate means shutting down a driveway for days, and on multi-unit properties that’s not realistic. Call (928) 260-0864 for a written quote.
Can you repair a gate that’s rusted through at the post base?
Yes. We cut the post below the corrosion, set a new post if needed, and re-hang the gate. If the frame is also rusted, we repair the rail and reinforce the corner. Call (928) 260-0864 to schedule an assessment.
Brands We Service in Inglewood
We work on BFT, Linear, Viking, and Ghost Controls, along with LiftMaster, FAAC, DoorKing, Elite, and Mighty Mule. Parts for the most common Inglewood motors are kept on the truck, and what we don’t carry we can typically source same-week. See our brands for the full list.
Pricing for Gate Repair in Inglewood, CA
| Service | Typical range in Inglewood |
|---|---|
| Motor replacement | $550 - $1,250 |
| Motor repair | $180 - $340 |
| Full automation package | $1,100 - $1,950 |
| Keypad installation | $250 - $450 |
| Video intercom | $800 - $1,200 |
| Phone entry | $450 - $800 |
| Hinge replacement | $180 - $400 |
| Post replacement | $400 - $900 |
| Rail repair | $300 - $750 |
In Inglewood, the two biggest price movers are salt corrosion and gate age. A gate that’s rusted through at the post base will need post replacement before motor work makes sense, and a 35-year-old gate that’s been repaired three times may cost more to patch than to replace. The written price we hand you before any work starts accounts for what we find during the assessment, and it doesn’t change unless we find something we couldn’t see and you approve the revision first.
Neighborhoods We Serve in Inglewood
We cover the full city of Inglewood, from the blocks around SoFi Stadium and Hollywood Park north to Century Boulevard and east to the edge of the city line. Response time in the area is typically same-day for urgent motor failures, and next-day for scheduled structural work.
- Morningside Park
- Inglewood Knolls
- Century Heights
- North Inglewood
- Downtown Inglewood
Service Area - Cities Near Inglewood
We also serve the neighboring communities around Inglewood. Our technicians cover Hawthorne, CA to the south, Culver City, CA to the north, Lawndale, CA to the southeast, and Manhattan Beach, CA to the southwest. Same coverage area, same written-price standard.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Inglewood
We’re familiar with Inglewood’s permit requirements, particularly in the corridor around SoFi Stadium and Hollywood Park where setback and swing-clearance enforcement is more active. We’ll tell you during the assessment whether your gate work is likely to require a permit, and we can coordinate with your contractor or handle the paperwork for installations where it’s needed. Call (928) 260-0864 and we’ll assess your property before you commit to anything.
Same-day in most cases. A slide-gate failure on a building serving 8 to 20 units is a high-priority call for us because tenants are blocked from their own homes. A live person answers 24/7, so you’re not leaving a message and waiting for a callback. Call (928) 260-0864 and we’ll get a technician dispatched.
Yes. We come out, assess the gate and the motor, and hand you a written price before any work begins. The estimate is free, and the written price is the price, unless we find something hidden that you approve separately. No surprises on the invoice. Call (928) 260-0864 to schedule an assessment.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Inglewood Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.