Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Tujunga
Installing a gate in Tujunga is not the same job as installing one in Burbank or Glendale. The canyon wind, the fire code, and the age of the housing stock all shape what will actually hold up. Most driveway gate installations in Tujunga run between $2,400 and $6,800 depending on the material, the operator, and what’s happening with the posts underground. We quote a written price before any work starts, and our crews get to most Tujunga neighborhoods the same day you call. Phone is (928) 260-0864.
Why Vance Gate Repair Is Tujunga’s Preferred Gate Installation Company
We have replaced and retrofitted gates on Foothill Boulevard, up Canyon Crest Road, throughout the ranch neighborhoods off Apperson Street, and across the horse properties that bleed toward Shadow Hills. Our technicians know which gates on Tujunga’s 1940s and 1950s lots were hung before UL 325 entrapment protection existed, because we see them every week. The conversation after a wind event is usually the same: a hinge post has been pulled out of plumb, the operator burned out trying to push a racked panel, and the homeowner wants to know if the old gate is salvageable. Sometimes it is. Sometimes the math says replacement is cheaper than rebuilding someone else’s 30-year-old mistake.
Every gate installation job under The Haven Standard includes a written price before work begins, a photographed record of what we found and what we installed, and the 365-Day Done Right Promise. If it’s not right within a year, Vance Gate Repair makes it right. No argument, no fee. Adrian Vance built this company out of commercial access-control work starting in 2014, and the documentation habit carried over. You get the same wiring diagram and photo log on a Tujunga driveway gate that a commercial site would demand.
Our Gate Installation Services in Tujunga
Driveway Gate Installation
Driveway gates in Tujunga often sit on wider-than-average lots, which means longer spans, heavier panels, and more strain on the hinges and operator. We install single swing gates, double swing gates, and sliding gates sized for the actual opening, not a catalog default. Where the existing concrete is spalling around the post base, we saw out and pour new footings deep enough to resist the cyclical wind torque that loosens shallow footings within a few Santa Ana seasons.
Pedestrian Gate Installation
A pedestrian gate off a side yard or the back of a Tujunga bungalow sees less wind than a driveway gate, but it still has to close square and latch against the same canyon gusts. We install steel, aluminum, and wood pedestrian gates with adjustable hinges and closers that hold their set. If the old gate was hung on posts that settled, we reset the posts before hanging the new panel, because no new gate fixes a bad post.
Sliding Gate Installation
Sliding gates suit Tujunga lots where a driveway slopes or where swing clearance is limited along the front setback. We install rack and pinion slide systems with proper guides, stops, and safety photocells. On foothill lots with sun-baked exposure, we use galvanized steel post caps and rails that don’t warp in the summer heat. Sliding gate installs here typically run $4,200 to $9,800 with an operator.
Swing Gate Installation
Swing gates are the most common install type in Tujunga, and the one that fails most dramatically when wind forces meet an undersized post. We recommend a 36-inch embedded steel post for any motorized swing gate on this side of the canyon. A lighter post will rack. We’ve pulled enough hinge bolts sheared by Santa Ana gusts to know what holds.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Tujunga
We work on whatever motor is already on the property. If you have a BFT operator on a gate that’s getting replaced, we’ll evaluate whether it can be safely retained or whether the new gate needs a new operator to meet current UL 325 entrapment requirements. We also install and service Linear, Viking, and Ghost Controls systems, along with FAAC and the other major gate-automation brands. We don’t steer you toward a replacement motor to make a sale. We tell you what the existing unit will and won’t do with a new gate hung on it.
Common Gate Installation Problems We See in Tujunga Homes
- Settled hinge posts: Decades of wind loading pulls older posts out of plumb, so a new gate hung on the old post will bind. We check post plumb with a level before we quote the job, and we tell you honestly if the footing needs to be replaced.
- Obsolete operators without entrapment protection: Gates installed before UL 325’s 2001 update often lack photo-eye or reversing-edge protection. A brand new gate paired with a 1990s operator is an installation fail waiting to happen, and it won’t pass inspection if you’re pulling permits.
- Wood gates that don’t meet VHFHSZ rebuild standards: Tujunga sits inside the Los Angeles City Very High Fire Hazard Severity Zone. After a hillside fire, LAFD requires ignition-resistant or non-combustible gate materials on rebuilds. Cedar and redwood don’t qualify. We quote compliant steel and aluminum options first.
- Operator burnout from wind overtorque: When a gate racks in strong wind, the operator’s motor pushes against resistance it wasn’t designed for. The motor burns out, the rack and pinion wear, and the homeowner calls us thinking the gate is dead when the operator just overheated trying to move a misaligned panel.
Pricing for Gate Installation in Tujunga, CA
Here are the ranges we’re seeing in Tujunga right now. A single steel or aluminum swing gate with a new operator runs $3,800 to $6,200 installed. A double swing driveway gate is typically $5,200 to $9,800, depending on the span and whether we need new post footings. A sliding gate with operator runs $4,200 to $9,800. A pedestrian gate without automation is $950 to $2,200. The price you’re quoted includes the written scope, the materials, the labor, and the photo record. It’s handed to you before we start. If another company gave you a written estimate, we’ll review it free and tell you if it’s accurate for Tujunga’s code and wind conditions. Call (928) 260-0864 for an exact quote.
We Also Serve Cities Near Tujunga
Our Gate Installation team covers Tujunga and the surrounding foothill communities. We regularly work in Burbank, Glendale, North Hollywood, and San Fernando. If you’re just over the city line, our crews still know the terrain, the wind patterns, and the code differences. Schedule and dispatch for Tujunga jobs is coordinated from Vance Gate Repair’s Los Angeles office, so we can route a crew to your hillside lot quickly.
Serving Tujunga, CA - Our Local Coverage Area
We’re based in the Tujunga area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Tujunga
In most Tujunga homes built between 1940 and 1960, the answer is no. The hinge posts have almost always settled or been pulled out of plumb by repeated Santa Ana wind loads. We can measure the deflection on site. If the post is out of plumb by more than a few degrees, hanging a new gate on it means the new panel will sag and bind within a season. We’ll show you the level reading before we cut anything out. Call (928) 260-0864 for an on-site post assessment.
Any new automatic gate in Tujunga must meet UL 325 entrapment protection standards, which means photo-eyes or reversing edges in place, proper warning signage, and a compliant operator. Because Tujunga falls under the LAFD Very High Fire Hazard Severity Zone, ignition-resistant or non-combustible materials are required on rebuilds. We handle the materials compliance and install to current code. Our team is familiar with what LA City inspectors look for when a Tujunga driveway gate gets pulled for final. Call (928) 260-0864 to walk through your project.
Often you can, if the gate panel and its posts are still square and load-rated for the new operator’s torque. We’d evaluate the panel, the posts, and the hinge points before quoting a new operator. If the old gate is wood and it’s located in a fire-hazard rebuild area, that’s a separate conversation about material compliance. We’ll tell you which way the math works. Call (928) 260-0864 for a written assessment.
Wind. Tujunga sits at the mouth of Tujunga Canyon, and Santa Ana winds funnel through that corridor with more force than the flat valley floor just a few miles south. Sustained gusts torque gate panels, which makes the operator motor work against resistance, which burns out windings and wears rack and pinion rails. Burbank and Glendale get wind, but not the concentrated canyon-channel flow. The fix is not just a stronger operator; it’s a gate and post assembly that doesn’t flex. That’s the design work we do on the front end of a Tujunga install. Call (928) 260-0864 for a quote.
LAFD code for the Very High Fire Hazard Severity Zone requires non-combustible or ignition-resistant materials for gate rebuilds. Steel, aluminum, and certain rated composite products qualify. Traditional wood does not. We quote compliant steel and aluminum driveway gates, and we can document material compliance for any permit or insurance claim you’re working through. Call (928) 260-0864 and we’ll discuss what pass inspection before you buy anything.
If you’re in Tujunga and need a new gate quoted in writing with a real price, call (928) 260-0864. We’ll send a technician who will measure the opening, check the posts, and hand you a number before any work begins. Free estimates, documented every step of the way.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Tujunga since 2014.