Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Orlando
A new gate installation in Orlando typically runs $2,800 to $9,500 depending on whether it’s a single swing gate, a double swing, or a slide gate, and whether power and conduit already exist at the posts. Most residential installs finish in one to two days once materials arrive. If you’re calling from Celebration, Lake Nona, Dr. Phillips, or anywhere else in the metro, call (928) 260-0864 and a live person answers, 24 hours a day, seven days a week.
We’re Vance Gate Repair, and installation is what we do most carefully: a written price before anything gets unboxed, a documented photo record before we leave, and a one-year Done Right Promise on the work. In Orlando specifically, that promise matters more than it does elsewhere, because our heat, our lightning, and our vacation-rental turnover rates punish gate hardware faster than almost any metro in the country.
Why Vance Gate Repair Is Orlando’s Preferred Gate Installation Company
Vance Gate Repair was founded by Adrian Vance in 2014 after years of commercial access-control work, and that background shows in how we handle residential installs across Orlando. We do not quote verbally and hand over a handshake. You get a written scope and a written flat price before any tool touches a post, under Haven Standard Clause 1. Then, under Clause 4, we photograph what we find, what we set, and what we install, and we leave that record with you. No future technician has to guess what’s in the ground or behind the board.
Orlando customers regularly tell us the photographic record is the difference maker. When a lightning strike takes out a control board two years later, the next tech knows exactly which surge protector we installed, where the conduit runs, and what the limit switch was set to. That’s not a marketing line. It’s a photo log with your name on it.
We’ve completed over 22,000 gate repairs and installs since 2014, every single one with a written price delivered before work started. Our technicians are background-checked and uniformed, and you get their name and photo before arrival. When you call from Winter Park, Altamonte Springs, or a neighborhood off Narcoossee Road, the same standard applies.
Our Gate Installation Services in Orlando
Driveway Gate Installation
Driveway gates in Orlando’s master-planned communities are frequently ornamental aluminum or wrought iron, and they often anchor into HOA-governed streetscapes where visual consistency is a hard requirement. We match the existing community profile where you’re subject to architectural review, and we spec post footings, operator arms, and hinge hardware for the real conditions here: high humidity, standing water near retention ponds, and summer afternoon lightning.
Pedestrian Gate Installation
A pedestrian gate beside a main driveway gate needs its own strike, closer, and often its own keypad or card reader, especially in Orlando communities where landscape crews and pool vendors need controlled access. We install and automate pedestrian gates in Lake Nona, Celebration, and the vacation-home corridors with the same written-price and photo-record standard we apply to vehicle gates.
Sliding Gate Installation
Slide gates make sense on Orlando lots where the driveway slopes up from the street or where swing arc space is tight. The track, cantilever rollers, and motor spec has to account for sandy soil that shifts with the wet-dry cycle. We pour deeper track beds than most builders call for, because we’ve seen what a few August downpours do to a shallow set.
Swing Gate Installation
Single and double swing gates dominate the 1990s and 2000s communities reaching end-of-life hardware all at once. A proper Orlando swing gate install means sizing the operator to the gate’s true weight and duty cycle, not the builder’s original guess. We measure leaf weight, hinge bearing load, and wind exposure before we spec the motor. That’s why our swing gate installs in Dr. Phillips and MetroWest aren’t back in six months with a sagging hinge post.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Orlando
We install and service nine major gate automation brands, so we’re not steering you toward a replacement motor because it’s the only one we know. On Orlando installs we commonly work with Ghost Controls and Mighty Mule for lighter residential swing gates, DoorKing and Elite for telephone-entry and keypad systems in HOA communities, and FAAC for heavier slide and commercial-duty applications. We keep common boards, photo-eyes, and remote transmitters stocked for Orlando service calls, which means less waiting on a parts truck when a vacation rental manager needs a gate back online before Friday check-in.
Common Gate Installation Problems We See in Orlando Homes
- Builder-grade operators dying early in vacation-rental corridors. Around Champions Gate and the US-192 corridor, a standard residential swing operator spec’d for maybe 20 cycles a day gets hit with 100-plus cycles daily from short-term rental turnover. The motor strips, the board fries, and the HOA gets a callback within months. We spec commercial-duty operators even when the community looks like a quiet suburb.
- Manual gates with no power or conduit run. A surprising number of Orlando homes were built with a manual gate at the driveway and no stub-out for future automation. Adding an operator means trenching for low-voltage wire, setting a new post or reinforcing the existing one, and often running line voltage to a transformer. We handle the full power run and conduit installation, not just the motor.
- Lightning damage to control boards. Orlando sits in Lightning Alley, the corridor between Tampa Bay and the Space Coast with some of the highest lightning-strike density in North America. Communities that skipped surge protection at initial install see fried boards and dead keypads after summer storms. On every Orlando install we recommend and offer surge suppression sized for this market’s risk.
- Rust and binding from humidity and standing water. Steel hinges, rollers, and anchor hardware near the region’s retention ponds and lakes corrode faster than inland non-subtropical cities. Gates start sagging, binding, or failing to fully close within a few years. We use sealed-bearing rollers, stainless anchor hardware where practical, and moisture-resistant greases on every Orlando install.
Pricing for Gate Installation in Orlando, FL
Here’s what you’re actually looking at in this market. A single driveway swing gate with automation runs roughly $3,200 to $6,000 installed in Orlando, depending on gate width and whether power is already at the post. A double swing gate installation typically lands between $5,500 and $9,500, because you’re powering two leafs, syncing two operators, and often reinforcing both hinge posts. A slide gate install usually runs $4,200 to $8,500 depending on track length and the motor spec. Adding a pedestrian gate alongside runs $1,800 to $3,400.
Every one of those numbers is written down and handed to you before work begins. Not “call for a quote.” A written price. That’s Haven Standard Clause 1, and it’s non-negotiable for us. Call (928) 260-0864 for a free estimate.
We Also Serve Cities Near Orlando
Our crews serve the wider Orlando metro. We regularly install gates in Orlando, Winter Park, Altamonte Springs, Casselberry, and Apopka, and we coordinate dispatch and scheduling from our Orlando office. If you’re a short drive from the city center, we’re already working in your area.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Orlando
A standard residential gate operator rated for 20 to 30 cycles per day can fail within 12 to 18 months in Orlando vacation-rental communities like Champions Gate and Reunion Resort, where turnover traffic pushes 100-plus cycles daily. The motor, the board, and the gear train all run far beyond their design duty cycle. That’s why we spec commercial-grade operators in these areas even when the community looks like a quiet residential street. Call (928) 260-0864 and we’ll assess your actual cycle count before recommending hardware.
Yes. Orlando’s position in Lightning Alley means surge protection should be considered mandatory on any automated gate install here, even for systems where it would be optional in other cities. We install surge suppressors on both the line-voltage side and the low-voltage accessory side, sized for the strike density this region records. Skipping it means losing a control board to a summer storm that’s three miles away. Our written quotes include this as a line item because we know this market.
Adding automation to a manual gate in Orlando typically requires trenching conduit from the house or nearest power source to the gate post, pulling low-voltage wire, mounting the operator and its bracket, installing safety photo-eyes on both sides of the gate travel path, and often reinforcing the hinge post. The gate itself may also need a steel stiffener or a new post pour if the original build wasn’t spec’d for motor torque. We handle the full scope: power, conduit, operator, safety edges, and photo-eyes. Gate Installation is a full-documentation job for us, not a motor swap.
Because the duty-cycle math in Orlando’s vacation-rental corridors is unlike anywhere else. A small HOA community off US-192 or near Champions Gate might look like a quiet suburb, but if those homes are short-term rentals, the gate is cycling thousands of times per month. A standard residential operator can’t sustain that. Experienced local installers spec commercial-grade operators, deeper footings, and heavier hardware because a callback in six months costs more than the upgrade. We’d rather quote the right motor the first time.
The most common compliance gap is missing or non-functional safety photo-eyes on gates that were installed before current safety standards were enforced, especially in 1990s and early-2000s Orlando communities where the original install was done with simple remotes and no entrapment protection. We fix it by installing photo-eyes on both sides of the gate path, adding contact edges where the gate meets the post, and wiring both into the operator’s safety circuit. Under Haven Standard Clause 4, we photograph the before and after and leave the documentation on site.
Contact Vance Gate Repair for Gate Installation in Orlando
If you need a gate installed or automated in Orlando, call (928) 260-0864. A live person answers, 24/7. We’ll schedule a free estimate, put the price in writing before any work starts, and leave you with a photo record of exactly what we installed and why. That’s the way it’s always been done here.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Gate Installation in Orlando since 2014.