Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Glendale, CA
Gate motor and opener failures in Glendale follow a pattern we can usually diagnose from the first phone call: a 20-year-old tubular-steel driveway gate on a late-1990s Arrowhead Ranch lot, a LiftMaster or FAAC operator that stopped responding after a monsoon dust storm, and a post that’s no longer plumb because caliche hardpan shifted beneath it. We repair, replace, and document every fix, with a written price handed over before any tool comes off the truck. If your automatic gate is grinding, drifting, or dead, call (928) 260-0864.
Why Glendale Homes Are Different
Glendale’s housing stock splits into two eras, and each one creates a distinct repair profile. North Glendale, especially the Arrowhead Ranch corridor and the master-planned subdivisions that filled in around it, has tens of thousands of ornamental tubular-steel driveway and courtyard gates installed between 1998 and 2005. Those gates are now 20 to 25 years old, which means hinge barrels are ovaling, powder-coat finishes are failing at the welds, and the original automatic operators are at the end of their service life, all at roughly the same time. The HOAs in those communities specify exact picket profiles and powder-coat colors, so a repair that would take an hour on a freestanding gate in Peoria becomes a compliance job in Glendale: the replacement hinge has to match the original finish, the welded joint has to disappear under the same color, and the operator arm has to fit the existing bracket geometry without modifying the gate face.
South and central Glendale is different. Ranch homes from the 1950s through the 1970s sit on larger lots, many of them now being retrofitted with driveway gates as owners add security. Those jobs involve new post footings, longer power runs, and older panels that sometimes need a dedicated circuit. And the whole city sits on caliche: a rock-hard soil layer that fractures under decades of thermal cycling, which is why a swing gate that “won’t latch anymore” in Glendale is often a leaning post, not a bad operator.
Climate finishes the list. Monsoon haboobs roll in from the southwest with almost no topographic brake, bending lightweight gate frames, packing slide tracks with fine caliche dust, and spiking line voltage enough to cook a control board. Then the 110°F summers dry out every lubricant on the gate and expand steel components until clearances close up. A Glendale gate that worked in March can be out of alignment by July for no reason other than heat.
Our Main Glendale Services
Most Glendale homeowners reach us for one of two things: a repair on a gate that’s already there, or a full installation when the old gate has reached the point where patching costs more than replacing.
Gate Repair in Glendale
We repair every mechanical and electrical part of an existing gate: hinges, posts, tracks, rollers, operators, control boards, photo-eyes, and keypads. In Glendale, repair work often includes matching HOA-required powder-coat finishes and correcting the post lean that caliche soil causes. No repair starts without a written price. Gate Repair in Glendale
Gate Installation in Glendale
New gate installation in Glendale means a site visit to check soil conditions, measure the opening, and review any HOA finish requirements before we quote. We install swing and slide gates sized for Glendale lots, with operators and safety devices set to manufacturer spec. The written quote includes everything: gate, posts, footing, operator, wiring, and safety edges. Gate Installation in Glendale
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Motor & Opener in Glendale
When a Glendale gate motor dies, the failure usually traces back to one of three causes: a monsoon power surge that took out the control board, a 20-year-old operator that simply wore through its gear train, or a leaning post that overloaded the motor until it burned out. Our Gate Motor & Opener work starts with a check of post plumb and drive alignment, because replacing a motor on a gate that’s already dragging is a waste of your money. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, so the brand already on your Glendale property is one we can repair or replace without steering you into equipment you don’t need.
Motor Installation
Signs you need it
The old motor hums but won’t move the gate, or it trips its internal breaker every time the gate reaches the open or closed limit.
What it costs in Glendale
Motor installation in Glendale typically runs $550 to $2,400 depending on operator class and whether the existing bracket and arm can be reused.
How we do it
We remove the old operator, verify the mount and arm geometry, install the new unit, set the limit switches, program remotes, and photograph the finished install for your record.
Motor Repair
Signs you need it
The gate opens partway, reverses unexpectedly, or the operator makes a loud grinding noise that wasn’t there last month.
What it costs in Glendale
Motor repair in Glendale ranges from $125 for a limit-switch reset to $400 for a gear-and-capacitor refresh, depending on what we find inside the unit.
How we do it
We open the operator, inspect the gear train and capacitor, reset or replace limit components, adjust travel, and document the settings we changed.
Linear Motor
Signs you need it
Your Linear-brand operator loses its remote programming after a power blip, or the gate stalls halfway and shows a fault code.
What it costs in Glendale
Linear motor repair in Glendale typically runs $125 to $400 for board, capacitor, or limit work; full replacement runs $550 to $1,700.
How we do it
We pull the fault history from the Linear board, identify the failed component, replace it, reprogram the remotes, and run a full open-close cycle test.
Slide Motor
Signs you need it
The slide gate shudders along the track, hesitates, or stops entirely after a dust storm packed the rail with caliche.
What it costs in Glendale
Slide motor repair in Glendale costs $125 to $500 for electrical and limit work; a replacement operator runs $800 to $2,400 depending on gate weight.
How we do it
We clear the track, check drive-sprocket and chain tension, test the motor’s amp draw under load, and set limits so the gate stops at the correct points.
Intercom Integration
Signs you need it
The gate operator works from a remote but won’t trigger from the intercom or phone entry system, or the intercom rings with no audio.
What it costs in Glendale
Intercom-to-operator integration in Glendale costs $150 to $450 for relay and wiring work; full intercom system replacement runs higher and is quoted on site.
How we do it
We trace the relay wiring from the intercom to the operator control board, replace or reprogram the relay, and verify the gate triggers cleanly from the call box.
What Gate Motor & Opener Costs in Glendale
| Item | Typical range in Glendale |
|---|---|
| Motor repair (limit, capacitor, gear) | $125-$400 |
| Motor installation (standard residential) | $550-$2,400 |
| Slide operator replacement | $800-$2,400 |
Can you fix a Glendale gate motor the same day it fails?
Usually yes. We carry common LiftMaster, FAAC, BFT, and Linear boards, capacitors, and limit assemblies on our trucks, so most Glendale motor repairs are completed in one visit. Call (928) 260-0864 with the brand and symptom and we’ll tell you what’s possible.
Why did my gate motor fail after a Glendale monsoon storm?
Monsoon dust and wind push debris into the track and stress the motor, but the bigger killer is line-voltage surges that hit the control board. A surge suppressor on the operator circuit prevents most of these failures.
Gate Access Control in Glendale
Glendale’s HOA communities and larger ranch lots both push homeowners toward access control, but for different reasons: Arrowhead Ranch buyers want a keypad so guests and landscapers don’t need a remote, while south Glendale owners retrofitting older homes often add phone entry because the driveway is long enough that nobody hears a horn. Our Gate Access Control work covers keypads, remotes, phone entry, card readers, and video intercoms, all integrated with the operator already on the gate.
Keypad Entry
Signs you need it
The keypad works intermittently, won’t accept a new code, or the buttons need to be pressed hard to register.
What it costs in Glendale
Keypad replacement in Glendale runs $150 to $450 including programming; adding a keypad to a gate that lacks one runs $250 to $600 with wiring.
How we do it
We remove the old keypad, mount the new one in the same position to keep the wiring chase intact, program the codes, and seal the housing against dust and sun.
Phone Entry
Signs you need it
The call box doesn’t ring your phone, drops the call when you try to open the gate, or has a cracked keypad face from sun exposure.
What it costs in Glendale
Phone entry repair in Glendale costs $150 to $450 for relay and wiring fixes; a full phone entry system replacement runs $600 to $1,800 installed.
How we do it
We test the cellular or landline connection, replace the failing relay, reprogram the directory, and confirm the gate triggers from the incoming call.
Remote Control
Signs you need it
Your remotes lost programming after a power outage, only one car’s remote works, or the gate opens but won’t close from the button.
What it costs in Glendale
Remote reprogramming in Glendale is $75 to $150 for the set; adding a new remote programmed on site costs $50 to $120 per remote.
How we do it
We clear the operator’s receiver memory, reprogram every remote on site, and test each one from inside and outside the gate.
Card Reader
Signs you need it
Cards work for some people but not others, the reader beeps but won’t release, or the reader face is cracked and fills with dust.
What it costs in Glendale
Card reader repair or replacement in Glendale runs $175 to $550 depending on reader type and whether new credentials must be issued.
How we do it
We test the reader’s output with a known card, replace the reader if failed, issue new credentials, and verify the gate releases for each one.
Video Intercom
Signs you need it
The outside camera shows a black screen at night, audio is one-way, or the indoor monitor won’t connect to the outdoor unit.
What it costs in Glendale
Video intercom repair in Glendale costs $150 to $450 for wiring and camera fixes; full video intercom replacement runs $800 to $2,300 installed.
How we do it
We isolate whether the camera, indoor monitor, or low-voltage wiring failed, replace the bad component, and align the night-vision IR so faces are visible after dark.
What Gate Access Control Costs in Glendale
| Item | Typical range in Glendale |
|---|---|
| Remote reprogramming (full set) | $75-$150 |
| Keypad replacement | $150-$450 |
| Phone entry system replacement | $600-$1,800 |
Will a keypad from Amazon work on my Glendale gate operator?
Sometimes, but it depends on the operator’s receiver frequency and protocol. A mismatched keypad burns hours and still doesn’t work. We match the keypad to your operator and guarantee the programming before we leave.
Can you add phone entry to my Glendale gate without replacing the motor?
Yes, phone entry connects to the operator’s existing open-input terminals. As long as the operator has a standard receiver input, we add the phone entry system without touching the motor. Call (928) 260-0864 for an exact quote.
Gate Parts & Welding in Glendale
Two things send Glendale gates into our welding bay: HOA-mandated finish matching and caliche-induced post movement. A hinge replacement on an Arrowhead Ranch gate isn’t just a bolt-on; it needs a welded or bolted mount that accepts the exact same powder-coat color the HOA approved 20 years ago. Our Gate Parts & Welding work covers hinges, posts, rails, rollers, and custom fabrication, with every job photographed and recorded before we leave.
Hinge Replacement
Signs you need it
The gate sags, scrapes the ground on the latch side, or the hinge barrel has visible play when you push on the gate.
What it costs in Glendale
Hinge replacement in Glendale runs $150 to $550 per hinge set, depending on whether the hinge is bolted or welded and whether finish matching is required.
How we do it
We cut or unbolt the old hinge, weld or bolt the new one in place, shim the gate to proper reveal, and apply a finish-matched coating to the new hardware.
Post Replacement
Signs you need it
The post leans visibly, the gate won’t latch because the post has moved, or there’s a crack in the concrete footing around the post base.
What it costs in Glendale
Post replacement in Glendale costs $600 to $2,200 per post, which includes demolition, new footing poured below the caliche layer, and finish work.
How we do it
We saw out the old post, excavate a deeper footing that reaches below the fractured caliche, set the new post, pour concrete, and re-hang the gate after the footing cures.
Rail Repair
Signs you need it
The bottom rail is bent from a car bumper or a monsoon wind gust, or the top rail has a crack propagating from a weld joint.
What it costs in Glendale
Rail repair in Glendale costs $150 to $600 per rail section, including straightening, welding, grinding, and finish touch-up.
How we do it
We cut out the damaged section, weld in new matching tubular steel, grind the joint smooth, and coat the repair to match the surrounding finish.
Custom Welding
Signs you need it
You need a gate section extended, a pedestrian gate fabricated, or a damaged decorative picket replaced with matching material.
What it costs in Glendale
Custom welding in Glendale is quoted by the job; most residential work falls between $200 and $1,500 depending on material, complexity, and finish requirements.
How we do it
We measure the existing picket or rail profile, fabricate the replacement piece in our shop, weld it in place, and powder-coat or paint to match.
Gate Rollers
Signs you need it
The slide gate drags, the rollers have flat spots, or you hear a rhythmic thumping as the gate travels.
What it costs in Glendale
Gate roller replacement in Glendale runs $100 to $450 per roller assembly, including track cleaning and alignment verification.
How we do it
We lift the gate off the failed roller, replace the assembly with the correct weight rating, clear the track of caliche dust, and test the gate’s travel under load.
What Gate Parts & Welding Costs in Glendale
| Item | Typical range in Glendale |
|---|---|
| Hinge set replacement | $150-$550 |
| Post replacement (with footing) | $600-$2,200 |
| Slide gate roller replacement | $100-$450 |
Does the HOA care if my repaired gate doesn’t match the original color?
Glendale HOAs, especially in Arrowhead Ranch, enforce finish standards on gate repairs. We match the original powder-coat color and picket profile so the repair isn’t flagged during a drive-by inspection. Call (928) 260-0864 and we’ll document the existing finish before quoting.
Why does my Glendale swing gate keep leaning no matter how many times I adjust the hinges?
The post footing is almost certainly sitting in fractured caliche. Adjusting hinges fixes the symptom for weeks; replacing the post with a deeper footing fixes the cause. We check post plumb on every repair before touching the gate hardware.
Brands We Service in Glendale
We service BFT, Linear, Viking, and Ghost Controls operators, along with LiftMaster, FAAC, DoorKing, Elite, and Mighty Mule. Our trucks carry common boards, remotes, capacitors, and limit assemblies for all of them, so most Glendale repairs happen in a single visit. Our brands page lists the full lineup.
Pricing for Gate Repair in Glendale, CA
| Service | Typical range in Glendale |
|---|---|
| Motor repair (limit, capacitor, gear) | $125-$400 |
| Motor installation (standard residential) | $550-$2,400 |
| Slide operator replacement | $800-$2,400 |
| Remote reprogramming (full set) | $75-$150 |
| Keypad replacement | $150-$450 |
| Phone entry system replacement | $600-$1,800 |
| Hinge set replacement | $150-$550 |
| Post replacement (with footing) | $600-$2,200 |
| Slide gate roller replacement | $100-$450 |
Two factors push Glendale gate repair prices higher than average: HOA finish-matching requirements that turn a simple hinge swap into a color-match and cure job, and caliche-related post work that demands deeper footings than a standard install. Every quote is written and handed over before work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in Glendale
We work across Glendale, from the HOA-governed communities of Arrowhead Ranch in the north to the ranch-lot neighborhoods of central and south Glendale. Response time for most repairs is same-day when called in before 2 p.m.
- Arrowhead Ranch
- Bellair
- Manistee Ranch
- Glen Lakes
- Westgate
Service Area - Cities Near Glendale
We also serve homeowners immediately around Glendale. If your gate is in Burbank, CA, Universal City, CA, North Hollywood, CA, or Tujunga, CA, call (928) 260-0864 and we’ll schedule a repair visit or free estimate.
Serving Glendale, CA - Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Glendale
We answer calls live around the clock and dispatch from our Los Angeles office to Glendale neighborhoods every day. Most repair calls placed before 2 p.m. are completed same-day. Emergency callouts for a gate stuck open or a car trapped inside the driveway are prioritized.
For repairs that don’t change the gate’s appearance, no. For hinge replacements, welded sections, or post work that could alter the finish, Arrowhead Ranch and other Glendale HOAs may require the repair to match the original powder-coat and picket profile. We document the existing finish so you can show compliance.
Can you come out and just tell me what’s wrong with my gate before I commit to a repair?
Yes. The diagnostic visit is free for Glendale homeowners. We check post plumb, operator function, limit settings, and safety devices, then hand you a written quote for the repair with a flat price. You decide whether to proceed; there’s no obligation.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Glendale Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.