Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Burbank
Gate installation in Burbank runs $1,800 to $6,400 for most residential projects, depending on whether you’re replacing an alley-facing sliding gate or building a new swing gate on a Verdugo foothills driveway. We’re in Burbank weekly, and we know the difference between a flat-grid alley gate that wrestles trash trucks every Tuesday and a hillside gate that has to hold square on decomposed granite. If you’re planning a new driveway gate, pedestrian gate, or full security gate, call (928) 260-0864 and we’ll give you a written price before any work starts.
Why Vance Gate Repair Is Burbank’s Preferred Gate Installation Company
We work on gates in Burbank the way a mechanic works on a specific make of car: we know what breaks here because we’ve seen it break here. Since 2014, Adrian Vance has kept the same documentation habit on every residential job that he developed on commercial access-control sites: photograph what’s found, record the measurements, and leave the homeowner a written record of what was installed and how it was set. That’s Clause 4 of The Haven Standard, and every Burbank job gets it. No extra charge.
Response time to Burbank from our Los Angeles dispatch office is typically same-day or next-day for gate installation quotes and site measurements. A live person answers the phone 24 hours a day, seven days a week. You won’t get a voicemail loop or a callback queue. But installation work isn’t a same-day sprint. It’s measured, ordered, and scheduled. We’ll come out, take the measurements, spec the gate and operator, and hand you a written price before ordering a single hinge. The price you sign is the price you pay.
Our Gate Installation team has installed and repaired more than 22,000 gates since 2014, and every one of them had a written price before the job started. That’s not a marketing line. It’s the only way we work.
Our Gate Installation Services in Burbank
Driveway Gate Installation
Most Burbank driveway gates fall into one of two worlds: alley-facing sliders behind the house or street-front swing gates out by the sidewalk. Alley-facing sliders need heavier bottom-track components because Burbank’s rear lanes see constant garbage truck, utility, and delivery traffic, and a light residential track will rack out of square within a few seasons. For street-front driveway gates we spec hardware for the Santa Ana wind load we know is coming between October and February. Both configurations get galvanized posts and stainless fasteners, which matter more here than people realize because salt air corrosion is a real failure mode even this far inland.
Pedestrian Gate Installation
Pedestrian gates in Burbank ranch homes and bungalows are usually wrought-iron or tubular steel, and most of the ones we replace were installed in the 1970s or 1980s. The original gate might still look decent, but the hinge posts are often rusted at the base where sprinkler overspray and soil contact have done their work. When we install a new pedestrian gate in Burbank, we set the posts in high-strength concrete, use adjustable hinges so the gate hangs square from day one, and photograph the entire job. You get the photo log when we leave.
Sliding Gate Installation
If you live on Burbank’s flat residential grid with rear alley access, a sliding gate is almost certainly the right functional choice given how narrow these lanes are and how often they take traffic. But the spec matters: V-groove rollers, not nylon wheels, and a heavier bottom track than the nationwide default. We see failed back-alley sliding gates in Burbank where the roller channel was never rated for the vehicle weight class it actually endures. When we install, we match the track and roller system to the real traffic pattern, not to a catalog’s “standard residential” spec. A gate that clears the alley by exactly the right clearance and rides a level track lasts years longer.
Swing Gate Installation
Up toward Brace Canyon Park and the Verdugo foothills, steep driveways change the installation math entirely. The gate operator has to be slope-calibrated, the hinges have to carry more load on the downhill side, and the post footings have to go deeper than the flat-grid standard because decomposed granite doesn’t hold anchors the way compacted valley soil does. We install swing gates in Burbank with galvanized hinge posts, stainless pins, and operators set with precise limit stops so the gate never over-travels against the slope.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Burbank
We work on nine major gate automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Burbank because a lot of the houses we service already have an operator bolted to the post, and the smart move is usually repairing or adapting that unit rather than replacing it. We don’t steer you toward a brand we prefer. We work on what’s already there and only suggest replacement when the existing unit is genuinely beyond service. For Burbank customers, we stock the most common DoorKing, Viking, and Elite parts locally, which cuts turnaround time on operator service down considerably.
Common Gate Installation Problems We See in Burbank Homes
- Bottom-track damage on rear-alley sliding gates. Burbank’s trash trucks and delivery vans squeeze through narrow rear lanes every week. The bottom track takes the abuse, and V-groove rollers wear out faster here than almost anywhere else in the valley. We install heavier tracks and replace worn rollers before the gate starts dragging or jumping the rail.
- Weld cracks from thermal fatigue. Burbank’s summer temps regularly hit 100°F or more, and steel expands and contracts with every cycle. Over a few years, that thermal cycling cracks welds and loosens aluminum frame corners. It’s why we see more gate frame racking here in 10 years than coastal LA sees in 20.
- Hinge post anchors stripped in decomposed granite. The Verdugo foothills are beautiful, but the soil is sandy and loose. Santa Ana winds load the gate laterally and the posters slowly work themselves loose. We re-bore to code depth and set posts in high-strength concrete for hillside Burbank gates, which flat-valley installers sometimes don’t think to do.
- Corrosion on painted steel hardware. Salt air exposure is real in Burbank, especially on gates that sit within a few miles of the coast’s marine layer drift. Powder-coated carbon steel looks great for about five years, then the rust bleeds through at the hinge welds. We recommend galvanized steel or stainless fasteners for Burbank installations because they actually hold up.
Up near Brace Canyon Park, one of our crews pulled a warped 1970s tubular-steel swing gate off a decomposed-granite hillside driveway. The original post footings had loosened to the point the hinge post tilted a full 3 inches. We re-bored the footings to code depth, set new galvanized hinge posts in high-strength concrete, and mounted a LiftMaster LA400 operator with slope-calibrated limits and a safety photocell across the steep grade. That’s a standard Burbank hillside issue, not an edge case.
Pricing for Gate Installation in Burbank, CA
Here’s what we charge in Burbank, in writing, before any work begins. A pedestrian gate installation runs $1,200 to $2,800. A single swing driveway gate with operator runs $2,600 to $5,400. A double swing gate runs $4,000 to $7,200. A rear-alley sliding gate, which includes the heavier bottom track and V-groove roller system Burbank alleys require, runs $3,000 to $6,400. The range accounts for material choice (galvanized steel runs more than powder-coated carbon steel but lasts far longer), post setting depth, operator brand, and whether we’re doing a full tear-out or a post-and-gate replacement. Every price is written down and handed to you before we order anything. Call (928) 260-0864 for a free estimate. No surprise invoice at the end. That’s Clause 1 of The Haven Standard.
We Also Serve Cities Near Burbank
We regularly install and repair gates in Burbank and the surrounding areas, including Glendale, North Hollywood, Universal City, and Tujunga. The same written-price standard and photo-documented service applies everywhere we go. If you’re within 20 minutes of the Burbank city limits, we can usually have a technician out for a site measurement within a day or two.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Burbank
Rear-alley sliding gates are hit and scraped constantly by trash trucks, utility vehicles, and delivery vans squeezing through narrow lanes, and that accelerates V-groove roller wear and bottom-track deformation. A street-front gate faces weather and occasional lateral load, but an alley gate is effectively a piece of infrastructure in a working lane. We recommend a heavier bottom track and roller system for Burbank alley gates than the standard residential spec. Call (928) 260-0864 to get a written price for a track upgrade.
A swing gate on a steep Burbank hillside driveway needs an operator with slope-calibrated limit settings, a photocell safety beam, and a hinge post set deep enough to hold in decomposed granite soil. The gate should be slightly counterbalanced or specified with a heavier-duty hinge on the downhill side. We set operators with precise limit stops so the gate never over-travels against the grade. For an exact recommendation for your driveway, call us for a free measured assessment.
Burbank sits on the San Fernando Valley floor and regularly records 100°F+ summer highs, among the hottest readings in greater LA. Steel expands and contracts with each thermal cycle, and over years that fatigue stress concentrates at the welds. Coastal cities see far less temperature swing, so their gates don’t accumulate the same thermal fatigue. When we weld in Burbank, we account for that expansion range and inspect existing welds for micro-cracks before they fail.
Galvanized steel is the better long-term choice for Burbank gates because salt air corrosion attacks painted steel at the hinge welds and post bases within five to eight years. Powder-coated carbon steel looks sharp on day one, but the rust starts where the coating is thinnest, and once it starts it’s a losing battle. Galvanized steel costs more upfront and pays for itself by not requiring rework. We’ll spec the right material for your exposure and give you the written price before any work starts.
Yes. Burbank follows California state law and UL 325 standards, which require automatic gate operators to include entrapment protection: a minimum of two independent systems like photocells, contact edges, or inherent obstruction sensors. Every automatic gate installation we do in Burbank includes a photocell safety beam across the gate path and a contact edge on the leading edge where required. We photograph the settings and include that record in your job file. Call (928) 260-0864 to schedule a code-compliant installation.
Contact Vance Gate Repair forGate Installation in Burbank
Call (928) 260-0864 to schedule a free gate installation estimate in Burbank. A live person answers 24/7. We’ll come out, take the measurements, spec the gate and hardware for your specific street or alley conditions, and hand you a written price before any work begins. That’s how we’ve done every gate installation since 2014, and it’s how we’ll do yours.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Burbank since 2014.
Gate Installation in Nearby Areas