Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Beverly
A swing gate installation in Beverly typically runs $3,200 to $7,800 depending on gate width, pillar condition, and whether we’re automating it. A sliding driveway gate usually lands between $4,500 and $9,500, with the track, motor, and safety photocells included. Those are Beverly numbers, not national averages, and they reflect what we actually see working on estate properties from Centerville to Beverly Farms. Call (928) 260-0864 and you’ll speak with a live person who can schedule a free site visit and hand you a written price before any work begins.
Why Vance Gate Repair Is Beverly’s Preferred Gate Installation Company
Since 2014, we’ve worked on gates that most companies won’t touch: century-old wrought iron hung on granite posts, double gates on crumbling brick pillars, operators retrofitted onto ironwork that predates standardized hardware. Beverly homeowners call us because we don’t steer them toward replacing a hand-forged gate when we can rebuild the hinge and keep the original iron. We service nine automation brands, including BFT, Linear, and Ghost Controls, so the motor that fits your property comes from what works, not from what we happen to stock.
Every job we complete in Beverly leaves a documented photo record: what we found, what we set, what we installed. Adrian Vance built that habit doing commercial access control work, and it carries into every residential driveway gate we touch. The written price you receive before the job starts is the same price on the final invoice. No adjustment, no add-on, no “we discovered something” conversation that changes the number. Under Haven Standard Clause 4, the photo log and written record are included on every visit at no additional charge.
Our Gate Installation Services in Beverly
Driveway Gate
A new driveway gate in Beverly has to account for the property it’s entering. On a Centerville Cape with a compact front yard, a single swing panel with a post-mounted opener keeps the footprint small. On a Prides Crossing estate with a wide crushed-stone drive, double swing gates or a sliding gate makes sense, but only after we assess the existing stone pillars. Many of those pillars date to the original estate build, and their mortar joints have taken a century of salt air and freeze-thaw cycles. We’ll tell you if the pillar needs reinforcement before we hang a gate on it; we won’t install a motor on a post that’s already leaning.
Pedestrian Gate
Pedestrian gates in Beverly often match the driveway gate’s period ironwork, which means the same custom fabrication constraints apply. We handle the full install: post setting, hinge mounting, latch alignment, and automation if you want keypad or intercom access. Where the existing pedestrian gate is wrought iron from the 1890s, we’ll preserve the leaf and replace only what’s failed, milling new pintles or welding new strap hinges to match the original pattern.
Sliding Gate
Sliding gates are common on Beverly properties where the driveway slopes or where a swing gate would block the street. A sliding installation needs a level track run, a solid footer for the operator, and enough clear travel space beside the opening. On coastal lots near Beverly Harbor, we also factor in salt exposure: the track brackets and operator housing get stainless or coated hardware, not bare steel. We’ll quote the full run: gate panel, V-track, motor, safety photocells, and the concrete pad.
Swing Gate
Swing gates are the default on older Beverly estates because that’s what the original posts were built for. But automation is where we see the most callbacks from other installers: a gate that swings too far, a motor that strains against a sagging hinge, a photocell that never gets installed because the wiring looked difficult. We set the limit switches, install the entrapment protection required by UL 325, and photograph the final travel position. If the hinges are worn oval, we fix that before the operator goes on. No motor compensates for a bad hinge.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Beverly
We maintain and install equipment from BFT, Linear, Ghost Controls, and six other major automation brands, which means we’ll match the opener to your gate and your property, not replace a perfectly good motor because we don’t know the brand. For Beverly customers, that matters: pre-2000 operators on Beverly Farms estates often have control boards that are no longer manufactured, and the right answer is sometimes a retrofit board or a rebuilt limit assembly, not a full system swap. We stock common parts for Beverly’s older operator models and can source harder-to-find components faster than a general fence company. Before we recommend anything, we’ll put the part number and the price in writing.
Common Gate Installation Problems We See in Beverly Homes
- Obsolete control boards on pre-2000 operators. Coastal winters and power flickers kill old electronics. Beverly Farms has a long inventory of gates installed twenty-plus years ago whose boards are simply gone from the supply chain. We retrofit or replace the board, then document what changed so the next technician isn’t guessing.
- Worn pintle hinges on century-old wrought iron. Salt air corrodes the hinge pin, freeze-thaw cycles shift the granite post, and suddenly the gate drags or seizes. No modern hinge matches a hand-forged leaf, so we mill new pintles to fit the existing straps, the same way a blacksmith would have approached the repair in 1920.
- Sagging double gates on aged pillar posts. When the hinge-post mortar cracks on a Prides Crossing brick pillar, the post rotates inward and the gates meet in the middle at the wrong height. Gate panels can be perfectly straight and still bind. We address the post movement and the sag correction before installing any opener, because a motor on a misaligned double gate fails fast.
- Missing entrapment protection on legacy operators. A gate installed before current safety standards often lacks the photo-eye that stops movement when a child or pet crosses the path. Retrofitting that sensor onto an older gate is standard practice for us in Beverly, and it’s not optional work we mention later. We include it in the scope and the written price.
Pricing for Gate Installation in Beverly, MA
A single swing gate with a post-mounted operator in Beverly typically runs $3,200 to $5,400. A double swing gate on existing stone pillars lands between $5,800 and $9,200, with sag correction and pillar reinforcement adding to the total if the posts are original masonry. A sliding gate with a steel frame and full automation runs $4,500 to $9,500; on Beverly Harbor lots, expect the coated hardware and stainless track brackets we recommend for any new installation, which typically adds $400 to $700 to the hardware line. A pedestrian gate with a keypad or intercom runs $1,800 to $3,400. Every quote is written, photographed, and handed to you before work starts. If you have a written estimate from another company, we’ll review it at no cost and tell you honestly whether it’s comparing like for like. Call (928) 260-0864 for a free site visit and a written price.
We Also Serve Cities Near Beverly
Our crews handle gate installation across Essex County’s North Shore, including Salem, Danvers, Peabody, and Lynn. We coordinate scheduling from our Boston office and dispatch local technicians to Beverly every weekday. If you’re in a neighboring town with a gate on a older estate property, the same Gate Installation process applies, and the same written-price standard follows every crew. For a closer look at what we do across Beverly, that list of services applies to every North Shore address we cover.
Serving Beverly, MA - Our Local Coverage Area
We’re based in the Beverly area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Beverly
Yes, in most cases we can. The operator mounts to the gate leaf and the pillar post, which usually requires a mounting plate fabricated to match the existing ironwork, an arm bracket that won’t pull the hand-forged leaf out of alignment, and hinges that can carry the load. We rebuild the pintle hinges first, then set travel limits, install the safety photo-eye, and photograph the final positions. The original gate stays. Call (928) 260-0864 and we’ll put a written strategy and price in your hand.
The hinges and the posts are the problem, not the panels. On a Prides Crossing or Beverly Farms estate with brick or granite pillars, decades of salt air and freeze-thaw cycles crack the hinge-post mortar, the post rotates inward, and the two gates meet low in the middle. We correct the post alignment, rebuild the hinge points, and only then do we install or reinstall the opener. Skipping the post work is why those gates sag again within a year.
Yes. Beverly sits on Beverly Harbor, and the airborne salt load is constant. Bare steel hardware rusts in months, and operators with exposed boards or unsealed housings fail years early. For any sliding gate installation in Beverly, we spec coated track brackets, stainless fasteners, and a sealed operator enclosure. It adds to the hardware cost and it’s worth it, because the alternative is a track bracket that snaps two winters in.
Yes. We do this regularly on Beverly estate properties where the latch, hinge, or decorative scrollwork was hand-forged before standard hardware existed. We’ll preserve the original leaf, weld or mill a new striker to fit the existing latch, and build the new gate or operator around the original iron, not the other way around. If a piece needs to be reproduced from scratch, we work with North Shore blacksmiths who can match century-old forging patterns, and we’ll quote that line item in writing before any work starts.
We install the track on a compacted, reinforced base so the footer doesn’t heave, and we set the track with proper drainage so water doesn’t pool and freeze under the gate. The operator gets a sealed enclosure and we use coated hardware throughout. In Beverly, the ground freezes and thaws dozens of times each winter, so the base and the pitch matter more than the motor. We’ll advise you if your site needs a different track configuration before we install, and the written price covers whatever the ground tells us.
Contact Vance Gate Repair for Gate Installation in Beverly
If you live in Beverly, from Centerville to Beverly Farms, and have a gate that’s sagging, seized, or simply no longer safe to operate, call (928) 260-0864. You’ll get a live person, a scheduled visit, and a written price before any work starts. Every gate we install in Beverly leaves with a photo log, a documented parts list, and the 365-Day Done Right Promise behind it. If something isn’t right within a full year, we make it right, no argument and no additional charge. That’s the standard, in writing, on every job.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Beverly since 2014.
Gate Installation in Nearby Areas