Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Alexandria
Gate installation in Alexandria, VA typically runs $1,800 to $6,500 for a new driveway gate with a motor, and $900 to $3,200 for a pedestrian gate, depending on the material, the size of the opening, and whether the site needs new footings or post work. Most installations in Alexandria take one to three days once the gate is fabricated and on site. We quote every Alexandria job in writing before any work begins, and our crews know the approval process in this city well enough to keep a project from stalling at the permit stage.
If you’re planning a driveway gate off King Street, a replacement pedestrian gate on a Del Ray rowhouse, or a full vehicular entry system in Cameron Station, call (928) 260-0864. A live person answers.
Key Takeaways
- Old Town properties on the historic register need Board of Architectural Review approval before any gate work, and we handle the submission with you.
- Alexandria’s Potomac humidity and freeze-thaw cycles mean footings and post anchoring need more care here than in drier Virginia suburbs.
- Written price before work starts, always. No verbal estimate handshake.
- We install and service swing, sliding, double, and pedestrian gates across all Alexandria ZIP codes.
Why Vance Gate Repair Is Alexandria’s Preferred Gate Installation Company
Alexandria homeowners deal with a set of gate problems you won’t find in Arlington or Fairfax: brick pilasters heaved out of plumb by Potomac frost cycles, ornamental ironwork on pre-Civil War rowhouses that the Board of Architectural Review protects, and early-2000s HOA gate operators in Cameron Station and Kingstowne that are now failing on a predictable schedule. We’ve worked through all of it. Our Gate Installation team has handled pedestrian gate replacements on Prince Street, swing gate retrofits in Del Ray, and sliding gate installs for newer builds along Eisenhower Avenue.
Adrian Vance started this company in 2014 doing commercial access-control documentation, and that habit carried over. Every Alexandria installation gets a written scope, a written price, and a photographic record of what was found, set, and installed. Under Clause 4 of our Haven Standard, that photo log is included on every job, no extra charge. When your HOA or the BAR asks what was done to your gate, you already have the answer in hand.
Response time to Alexandria from our Washington, DC office is the same as any local crew: same-day for troubleshooting and quote visits, with installation scheduled once materials and approvals land. A background-checked, uniformed technician arrives with a name and photo sent before arrival. You know who’s walking up the driveway.
Our Gate Installation Services in Alexandria
Pedestrian Gate Installation
The pedestrian gate is the front door of an Alexandria property, and in Old Town it’s often a historic artifact as much as a security feature. We fabricate and hang ornamental iron pedestrian gates that match the BAR-required profile, including salvaged hand-forged hinges and reproduction cane bolts when the board requires them. In Del Ray and Rosemont, where the stock is 1920s and 1930s brick, we set new posts in concrete below the frost line so freeze-thaw cycles don’t pull the gate out of plumb two winters later.
Swing Gate Installation
Swing gates are the most common driveway gate style in Alexandria, and they fail here for a specific reason: the hinge-side post moves. Old Town brick pilasters shift with frost heave, and even newer block columns in Kingstowne settle differently than the driveway slab. We set swing gate posts with deeper footings than the minimum spec and use adjustable hinge plates so the gate can be re-trued without cutting and re-welding. A typical double swing gate installation in Alexandria runs $4,200 to $7,800 including the motor and safety edges.
Sliding Gate Installation
Sliding gates make sense on Alexandria properties where the driveway slopes toward the house or where a swing arc would cross a sidewalk. The cantilever style has no track in the ground, which matters here because Potomac moisture and road salt from Old Town’s narrow streets eat standard track systems. We install and service BFT and Viking slide operators, and we run the power conduit and safety photo-eyes to meet current UL 325 entrapment standards. Sliding gate installs in Alexandria typically run $3,500 to $6,900 depending on gate width and operator brand.
Double Gate Installation
Double gates cover wide driveways, and in Alexandria those tend to be on larger lots in areas like Seminary Hill or newer construction near Potomac Yard. A double swing or double slide system needs synchronized operators, a center stop, and edge sensors on both leaves. We install systems where the two operators communicate so one leaf never outruns the other. Double gate jobs in Alexandria usually start around $5,500 and go up from there based on gate weight and automation choice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Alexandria
We service gates built on nine major automation brands, and we install or retrofit with the one that fits the site, not the one we have sitting on a shelf. In Alexandria, homeowners most often bring up Linear operators on older swing gates, Ghost Controls kits on newer DIY-installed driveways, and Viking on cantilever slide systems in newer builds. We stock common parts and boards for these brands locally, so a failed operator in Alexandria doesn’t mean waiting a week on a national backorder. We quote the brand and model in writing before any work starts.
Common Gate Installation Problems We See in Alexandria Homes
- Hinge post heave from Potomac freeze-thaw cycles. Old Town brick pilasters shift each winter, pulling hinge-side posts out of plumb and leaving gates dragging on the latch side or failing to close. Repair means resetting the post in a deeper footing, not just shimming the hinge.
- HOA gate operators hitting end-of-life. Cameron Station and Kingstowne have vehicular gate systems installed in the early 2000s that are now burning out loop detectors or stripping rack-and-pinion drives. The gate looks fine until the operator quits mid-cycle.
- Humidity-driven rust through on new ironwork. Install a steel gate in Alexandria without a marine-grade primer and you’ll see pitting at the hinge welds within three years, faster if the gate faces the river. We specify that primer on every Alexandria installation, including powder-coated work.
- BAR compliance back-and-forth. Old Town properties on historic review can’t swap a period iron gate for a modern aluminum panel. We prepare the BAR submission with material and profile documentation so the approval moves forward the first time.
Pricing for Gate Installation in Alexandria, VA
The price you pay for Gate Installation in Alexandria reflects material, automation, and how much site work the job requires. A single pedestrian gate in Old Town with BAR-compliant ironwork runs $1,200 to $3,600, depending on whether we’re salvaging the original hinges or fabricating new ones to match. A residential swing gate with one operator lands between $2,800 and $5,200, and a full double gate system starts around $5,500. Sliding gate installs for the cantilever style run $3,500 to $6,900.
What changes the number most in Alexandria is the footing. Properties with brick pilasters that need rebuilding add $400 to $1,200 per post, and that’s a real number, not a surprise line item: it’s in the written quote before we start. The same goes for HOA work where we coordinate with a management company, which adds a small coordination line we disclose up front. Call (928) 260-0864 and we’ll bring a written estimate to the site, no verbal pricing games.
We Also Serve Cities Near Alexandria
Our Gate Installation crews work throughout Alexandria and the surrounding Northern Virginia communities. We handle gate projects in Arlington, Annandale, Burke, and Oakton as well, applying the same written-price standard and photo documentation on every job. If your property sits in Fairfax County close to the Alexandria line, the same crew that quotes Old Town will quote you.
Serving Alexandria, VA - Our Local Coverage Area
We’re based in the Alexandria area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Alexandria
Yes, if your property is a contributing structure in the Old Town historic district, the Board of Architectural Review must approve the gate’s material, profile, and hardware before any work begins. We prepare the submission package, including dimensions, material specs, and photographs of comparable period ironwork, and we schedule installation only after the BAR issues the certificate. Call (928) 260-0864 and we’ll tell you in the first visit whether your address triggers BAR review.
We provide the HOA or management company with our written scope, insurance certificate, and a reference sheet specific to the community, then we work directly with their approval timeline. In Cameron Station and Kingstowne, where the operators are early-2000s and nearing replacement, we’ve done enough of this to quote the work in line with what the board expects to see. That coordination time is disclosed in the written estimate, not added after.
Yes, we match period-appropriate ornamental ironwork using blacksmith-sourced reproduction hardware and, where the BAR requires it, salvaged hand-forged hinges and cane bolts. Our crew recently rebuilt a pair of Prince Street pedestrian gates in Alexandria where the original hand-forged hinges were re-set and a matching cane bolt was fabricated to restore latching geometry. The BAR-approved profile comes first; the automation, if any, is hidden as much as the site allows.
Because the hinge-side brick pilaster is moving with seasonal frost heave, which pulls the post out of plumb and transfers all the gate weight onto the hinge welds. A standard hinge adjustment or weld patch doesn’t fix the post; it just buys a few months. We rebuild the post footing below frost depth and re-set the gate with adjustable hinge plates so subsequent movement can be corrected without re-welding. That’s the Alexandria-specific fix, not a generic patch. Call (928) 260-0864 for an on-site assessment with a written price.
Yes, all automatic gate operators in Alexandria must meet current UL 325 standards, which require entrapment protection such as photo-eyes, contact edges, or both, depending on gate type and travel path. We install those safety systems on every automated gate we set in Alexandria, and we document their placement in the photo log you receive at the end of the job. If an existing Alexandria gate didn’t get this protection when it was installed years ago, we’ll flag it and quote the retrofit.
Contact Vance Gate Repair for Gate Installation in Alexandria
If you’re weighing a new driveway gate, replacing a sagging Old Town pedestrian gate, or dealing with an HOA operator that’s given up, call (928) 260-0864. You’ll get a live person, a written quote for your Alexandria property, and a photo record when the job is done. The estimate is free, and the price is on paper before anyone picks up a tool.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Alexandria, VA and Northern Virginia.
Gate Installation in Nearby Areas